The FatMax technician's bag has a rigid waterproof plastic bottom, and an ergonomic rubber grip handle. It has a removable divider and provides easy access to the tools. It is constructed from heavy-duty 600 denier nylon, and has a comfortable heavy-duty shoulder strap. Industrial leather reinforcements in key stress areas. It measures 28 x 29 x 38cm.
Marcrist DDM1 Core Drill Machine for drilling holes in wood, plastic, concrete, bricks, and stone. Has two speed settings, that are controlled with the flip of a switch. Reduced vibration for protection against white fingers to allow a longer drilling time. Specification Chuck Size: 13/16mm.Input Power: 1,200 Watt.No Load Speed: 0-1555/0-3000/min.Core Capacity: 152mm.Weight: 3.8kg. Sound Pressure Level LpA: 91 dB(A), KpA: 3 dB.Sound Power Level LwA: 102 dB(A), KpA 3 dB. Vibation Emmission Values: Concrete: ah ID: 8.75 m/s2, K ID: 1.5 m/s2. Metal: ah ID: 3.08m/s2, K ID 1.5 m/s2.Marcrist 2 Speed Core Drill Machine 1200 Watt 110 Volt Version.
Number of drilling modes: Three. Hammer drill, rotary drill, hammer only. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling. The HR3210C features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration Forward/reverse rotationVariable speed triggerTorque limiter3 functionRotary onlyRotary hammerHammer onlyDouble insulated Blows per Minute: 1,650-3,300bpmNo Load Speed: 315-630rpmInput Wattage: 850wMax Bit Diameter: 32mmMax Core Diameter: 90mmImpact Energy: HR310C: 5.6 JoulesHR3210FCT: 6.4 JoulesWeight:HR310C: 5.2kgHR3210FCT: 5.4kg Chuck type: SDS plusVibration drilling : 2.5 m/sec²Vibration hammer drilling: 10 m/sec²Vibration chiselling: 7 m/sec²Vibration K factor: 1.5 m/sec² Supplied with: Side handle, depth stop, bit grease, carry case. HR3210 FCT also supplied with Quick Change Chuck.
The Carpenters TC hammer is an ergonomically designed hammer, forged in one piece with an I-profile for increased durability with a vibration damping urethane plug. The shape of the striking face is right angled to the handle. The claw opening and angle give the best possible grip on the nail and it has a thin, strong claw for easy access without leaving marks, and it is rounded to prevent it tearing your trousers. The ergonomically designed handle with clear end stop is available in two sizes: L and XL.Handle size: XL.Overall weight: 720g / 26oz.
The ALM Manufacturing WX168 Spool & Line 2mm x 6m is suitable for: Worx: WG168 & WG168E. Compares to: WA0014. Line Diameter: 2mm.Line Length: 6m. Manufactured in the UK.
