Libre
Soutien
Carefully engineered bevel edged chisels to satisfy most professional requirements from smooth precision work to demanding carpentry applications. The specially designed two-component handle maximises control and comfort-in-use. The hardened and tempered blade is precision ground for maximum sharpness and long lasting performance, and honed ready-to-use.1 of each chisels 6mm, 12mm, 16mm, 22mm, 25mm and 32mm.in a chisel roll.
The tool has double insulation for increased user protection and a built-in dust collection system to keep wok areas free from debris and dust. Hook and loop type abrasive paper can be used. It is supplied with a front grip, dust bag and an abrasive disc.
Hammer fixings are for fast fixing with minimal screwdriver work. Quicker to use than standard plugs. For fixing stud battens to walls before cladding. Although hammered in, they can be un-screwed.Size. 5 x 50mm. Card of 10.Fixture Thickness 25mm.
These Forgefix Phillips, Single Coarse Thread (SCT) Drywall Screws have a black phosphate finish for increased durability. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. They are supplied collated, with 50 screws per strip and 1,000 screws per box. APPLICATION:Designed for fitting dry lining to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Collated Screw Phillips Bugle Head SCT 3.99 x 35mm Box 1000
The DEWALT D25133K SDS 3 Mode Hammer Drill is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 26mm in diameter. It has a rotation-stop mode for light chiselling applications in brick, soft masonry and occasionally concrete. It also features an impact-stop mode for drilling in wood, steel, ceramic and screwdriving applications. The drill has a mechanical clutch that eliminates sudden high-torque reaction, should the bit jam. It features electronic variable speed for total control in any application. The ergonomic rubber coated back handle and industrial design provides easy and comfortable handling in any application. Suitable for the following applications: Drilling holes in solid masonry, concrete and stone from 4 to 26mm in diameter to various fixing. Drilling through holes in masonry to house pipes and cables. Light chipping in brick or masonry Tile removal from kitchens and bathrooms. Small channelling in brick. Mortar and plaster removal. Some drilling in wood and steel. Specifications: Mode: Rotary, SDS Hammer, Chisel Only. Input Power: 800 Watt. No Load Speed: 0-1,500/min. Impact Rate: 0-5,550/bpm 2.6 Joules. Capacity: Wood: 30mm, Steel: 13mm, Concrete 26mm, Core: 50mm. Toolholder: SDS-Plus. Weight: 2.3kg.
Bahco Raker Tooth Hard Point Bowsaw Blade are ideal for cutting in green wood. Made from hardened and tempered high quality steel with high frequency, induction hardened peg toothing. They have been treated with a rust prevention coating and packed in individual sleeve printed with graphically illustrated text for correct blade selection. Will fit most makes of bowsaw frame.1 x Bahco 23-30 Raker Tooth Hard Point Bowsaw Blade 755mm (30in)