SBS80 series metric sockets featuring the dynamic drive profile, for higher efficiency and an optimum grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel with a nickel and matt chrome-plated finish. 1/2in square drive.Size: 23mm.
Rapid No. 8 brads are precision cut, high-performance steel brads (with head). They are ideal for carpentry, panels, baseboards and light furniture. Precision cut wire ensures the best incision.Specifications:Length: 20mm.Box: 750. For use with the Rapid R553, R606, PSN15-30, PN15-50, 18G, 18G+ and EN50 nailer/tackers.
The Faithfull universal carpenters hammer with precision ground and hardened pein and head.This well balanced hammer allows maximum use for all types of carpenters fixings.Fitted with a hickory handle.Manufactured in accordance with BS876.Head Weight: 340g (3/4 lb).
The Makita DHP459 features: Compact design with an overall length of only 192mm. Single sleeve keyless chuck allows for easy bit installation/removal by one hand. LED Job light with pre-glow function. BLDC motor specially designed to provide, above all, more work amount on a single full battery charge.
These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting. APPLICATION:Used in many applications other than roofing, when joining products together.Use clearance drill sizes 1mm larger than bolt diameter. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.Roofing Bolt ZP M6 x 70 Bag 25
These Forgefix Phillips, Single Coarse Thread (SCT) Drywall Screws have a black phosphate finish for increased durability. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. They are supplied collated, with 50 screws per strip and 1,000 screws per box. APPLICATION:Designed for fitting dry lining to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Collated Screw Phillips Bugle Head SCT 3.99 x 35mm Box 1000
