Libre
Soutien
features pre-wired cord with a plug to install in your electrical socket, a output socket to plug your appliance, and the LED display shows current temperature and start/stop temperature. This device is fairly simple to set up and adjust, switch to heating or cooling mode freely. It is very accurate in keeping the temperature at the desired level. Plug and play design, easy to use. It is suitable for freezer, green house, dog house,incubators, etc. Features: Show the measured temperature, start temperature and stop temperature at the same time. Digital tube LED display for clear readings, 4 buttons for easy operation. Pre-wired cord with a plug, plug and play design for convenient use. Heating/refrigeration modes, users can set the start/stop temperature freely. Temperature measuring range: -9C~99C; resolution: 0.1C. Also with temperature calibration function. Indicator light for indicating working status. Suitable for a wide range of applications, such as fish tank, floor heating, green house, etc. Note: This controller can not be used with air conditioner and compressor.
98% bacterial filtration efficiencyIdeal for dry surgery when there is no risk of splashes60 masks per packConforms to EN14683:2005 type II
Faithfull Flat bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting with a bright finish for rust protection. All sizes except the 6mm have a non-slip hexagonal shank with a locking mechanism compatible with adapters or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.Diameter: 25 mm Overall Length: 152 mm
Short sleevedConcealed button frontBack length 68cmUp to 50° wash120gsm 67% polyester/33% cotton
Runde Klebeschraube für Mauerwerk und Stein (2,5kg) Die runde Klebeschraube ermöglicht das schnelle und einfache Anbringen von Objekten bis zu 2,5kg im Innen- und Aussenbereich. Als clevere Alternative zu ""normalen"" Schrauben oder Nägeln verursacht sie keine Schäden am Untergrund und lässt sich problemlos wieder entfernen. Ausserdem ist für die Verwendung kein zusätzliches Werkzeug notwendig. Die runde Produktvariante eignet sich mit einer Design-Abdeckplatte besonders für Anwendungen, bei denen die Klebeschraube sichtbar bleibt. Geeignete Untergründe für die rechteckige Klebeschraube: Aussenfassaden, Mauern, Ziegeln oder Beton. Runde Klebeschraube für raue, feste Untergründe, z.B. Klinker Hält Objekte bis zu 2,5kg pro Schraube (5kg bei zwei Schrauben) Mit dekorativer Design-Abdeckung für sichtbare Anwendungen Wiederablösbar Innen- und Aussenbereich Klebeschraube für starken Halt auf schwierigen Oberflächen Der starken Klebeleistung ist es zu verdanken, dass man beim Befestigen von Gegenständen
