Liberon Stone Floor Wax 2.5 Litre

Bee Hive Smoker Smoke Keeper Smoker Cámara de calor de acero inoxidable Equipo de apicultura de fuelle amarillo Smoke Bee para apicultor

17 unids Brocas Set Martillo Eléctrico Broca Cincel Cortador de Agujero Taladrar Ranurado Herramientas con Caja de Plástico

Saw Table Saw Slot Ajustador Mortaja y herramienta Tenon Medición móvil Longitud del bloque Compensación Herramientas para trabajar la madera

These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 in). Blade length (B): 16mm (0.63 in). Head width (C): 16mm (0.63 in). Head depth (D): 8mm (0.31 in). Tip width: (F): 1.6mm (0.06 in). Cutting capacity: 0.4-2.0mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.

The Bosch S1122BF Blades are part of the "Flexible for Metal" range.  - Bi-M, Side Set & Milled - For Thick Sheet Metals (3-8mm), Solid Pipes & Profiles (up to 175mm diameter) Specification: Total Length : 225mm Tooth Spacing : 1.8mm / 14TPI

The Arrow RL100 riveter is made of an all steel construction with comfortable vinyl grip. The spring-loaded handle allows for easy rivet loading and ejection, with the changeable nose piece taking a 1/8 diameter rivet in one hole, and 5/32 and 3/16 diameter in the other hole. To change hole size simply loosen screw on nose piece plate, swing pivot plate around then re-tighten screw.Riveter only without any rivets supplied