Facom JET.C4M4 Tool Chest 4 Drawer Red

The Knipex 26 21 200 bent long nose side cutters have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Dipped handles.The Knipex 26 22 200 bent long nose side cutters have Bi-material, 2-component handles for a more comfortable and positive grip. They have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Hard wire diameter: 2.2 mm.Medium wire diameter: 3.2 mm.Hardness approx. 61HRC.Length. 200 mm.

These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. APPLICATION:Designed for fitting dry linings to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 50mm Bulk 1000

Teng Tools impact sockets are specifically designed for use with power tools and air tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality. They are size marked for easy identification. These regular 6-point deep impact sockets have a 1/2 inch square drive. They are manufactured to the latest DIN standard for industrial use.The TEN920624 Impact Socket has the following specifications:Size: 24mm. Length: 78mm.

Designed with a 0.5HP motor and a 3 litre aluminium tank this compact and ultra-quiet 240 volt Compressor comes with a 1 Year Warranty. With an option of two voltages to choose from (110 and 240) its low-noise oil-less motor is even ideal in domestic situations.Offering portable pneumatic power for a various amount of applications, such as 2nd-fix joinery, sheathing, upholstery, pipe-testing, trimming and beading.

The design enables these Tool Clips to be used in a wide variety of applications to either display, hold or store a number of items including tools, brooms, rails etc... CT pattern tool clips, bright zinc plated. Sizes available: from 1/4in to 1.1/2in diameter.Size: 1/2inSupplied in packets of 25 clips

It has a reliable and long lasting universal motor, aluminium pump head and auto start/stop. The standard Nilfisk bayonet coupling on the new G1 gun ensures compatibility to all the Nilfisk consumer accessories range. It has on board storage for the gun, lance, nozzles and cable. The Click & Clean nozzle system makes it quick and easy to change the nozzles. Quick connection of hose with integrated swivel function. It can also be operated from a standing water source such as a water butt tap.