Monument 2050L Gas Meter Radiator Bleed Key

The DEWALT DCK654P3T XR Compact TSTAK­ Kit, contains the following: 1 x 18 Volt DCD796 XR Brushless Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Max Torque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm.Weight: 1.3kg. 1 x 18 Volt DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18 Volt DCS355 XR Cordless Oscillating Multi-Tool delivers up to 57 percent more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mm.Weight: 1.06kg. 1 x 18 Volt 125mm DCG412 XR Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 18 Volt 165mm DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change. No Load Speed: 3,700/min.Max Cutting Depth: 90 degree : 55mm, 45 degree : 42.1mm.Blade: 165 x 20mm Bore.Weight: 3.8kg. 1 x 18 Volt DCH273 Brushless XR 3 Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm.Impact Energy: 2.1 Joules.Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mmWeight: 3.1kg.

The RB40VA has a high efficiency fan for increased output air volume, a variable speed 550 watt motor, external brush caps for rapid checking and replacement and soft-grip wrap around handle for comfort and ease of use. Supplied with a dust bag and nozzle.

Succeeding the HP330 which was developed by adding hammer mechanism to drill driver model DF330D. Coming from solid tried and tested heritage but with slide on Compact eXtreme Technology Batteries. Featuring increased motor power for higher application speed and a max tightening torque. The rubberised handle has been designed for best grip and maximum thrust to the bit. A single LED joblight has pre-glow and after-glow functions handy for working in dark conditions.

Useful for laying out and scribing circles beyond the capacity of ordinary dividers. Clamping device firmly holds points, which can be replaced with a pencil. The heads will accommodate a beam up to 9.5mm (3/8in) thick and 19mm (3/4in) wide. Beam is not supplied. 2 Trammel heads, 2 small points 150mm (6in).

The Plasti-Kote Metal Protekt can be used on both interior and exterior surfaces and gives long-lasting protection against rust and corrosion. Available in different colour finishes, Metal Protekt is ideal for giving a splash of colour to wrought iron gates or garden furniture and many other decorative projects. It is quick and easy to use and fast drying. Drying time: touch dry in 10-20 minutes, thoroughly dry in 30-40 minutes. Coverage: approximately 2.23m² per tin.PKT1292 Metal Protekt has the following specifications:Colour: Bright Red. Pack size: 400ml.

Monument D.I.Y. Tap Reseating Tool re-cuts the seat of leaking taps. Fits BS5412 & BS1010 1/2in and 3/4in taps. Complete with: 17, 19 and 25mm (11/16in 3/4in 1in) Flat Cutters and two double ended plastic bushes. Made in Britain.