Libre
Soutien
Features
Waterproof membrane Thermal lining 60 g Reinforcement palm Cuff puller Long cuffs Fold joints Lining polyester
Stabiler Halt und Tragekomfort. Der Nike Shape Zip Bra Women Sport-BH mit mittlerem Halt und eingearbeiteten Stabilisatoren aus weichem, schweißableitenden Material sorgt bei jedem Workout für Halt. Die Dri-FIT-Technologie sorgt für trockenen Tragekomfort. Stay cool: Bleibe kühl, auch wenn es heiß ist und Du schwitzt!Eigenschaft: Material: Body/Trägerfutter: Dri-FIT 75% Nylon / 25% Elasthan. Einsatz in der Mitte des Rückens/Futter: Dri-FIT 78% Polyester / 22% Elasthan. Polsterung oben und hinten: Dri-FIT 90% Polyester / 10% Elasthan. Polster: 100% Polyurethan Passform - Fit: Eng sitzend geschnittenGrößenflag: Fällt normal ausPflegehinweise: Maschinenwäsche, keinen Weichspüler benutzenDri-FIT Material saugt den Schweiß auf und hält trocken und frisch: Schneller Feuchtigkeitstransport nach außen. Hält den Körper angenehm trocken. Das Dri-FIT Funktionsmaterial sorgt für raschen Feuchtigkeitstransport von Deiner Haut zur Gewebeoberfläche zur Verdunstung und hält so Deinen Körper angenehm trocken Medium Support - Stützende Passform: Für Sportarten mit mittlerer Belastung, wie Radfahren, Tanzen und Kardio-Training und auch Laufen Erstklassiger Halt: Die Schulterträger vorne verfügen über eingearbeitete Stabilisatoren, die Auf- und Abbewegungen dämpfen und sorgen für besseren Halt beim Laufen und SpringenTragekomfort: Weiches, elastisches Material am Ausschnitt, im Achselbereich und am Brustband ermöglicht eng anliegenden Tragekomfort beim Workout Bewegungsfreiheit: Ein Racerback-Design gewährleistet uneingeschränkte, bequeme Bewegungsfreiheit bei allen Aktivitäten Front-Reißverschluss mit Zip-Garage für mehr Komfort Reißverschluss verriegelt wenn er nach unten zeigt, um ein Verrutschen des BHs beim Workout zu verhindernDoppelte Schulterträger aus Textil und Mesh-Racerback für besseren Halt und gute BelüftungWeicher Gummibund innen für hohen TragekomfortDie vorgeformten Innenkörbchen mit Mesh, bieten starken Halt und geben eine natürliche FormDas Racerback-Design ermöglicht bequeme Bewegungsfreiheit Weicher, elastischer Besatz am Ausschnitt und im AchselbereichNike Schriftzug vorne auf dem Reißverschluss eingenäht Swoosh Logo hinten aufgedruckt
The Protone weighs just 215g and uses a 3D Dry padding with a multi-layer open cell construction process to give a more comfortable ride.It has removable and washable inner padding¸ made from CoolMax® fabrics and its inner padding fabric has been treated using the Sanitized® antimicrobial process. KASK has also continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top¸ base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.
Robuste Olympic Hex Bar 42 x 64 cm L/B aus Stahl, ideal geeignet f
