Libre
Soutien
The DEWALT DWS520KT Heavy-Duty Plunge Saw has full wave electronics that maintain a constant speed under heavy load and the variable speed allows you to select the correct speed depending on the material you are cutting. The anti kickback function stops the saw from moving backwards along the rails and helps stop the saw from climbing out of the work piece when making plunge cuts. The parallel plunge allows the user to maintain a smooth and constant hand position while cutting and the included 48 tooth blade gives a fine and accurate finish with very little breakout in laminates. The rail adjustment allows the saw to be adjusted accurately to the rails and it has a 55mm depth of cut that allows the trimming and sizing of most common door sizes. The enclosed guard gives a 90% dust extraction capability. Specification: Input Power: 1,300 Watt.No Load Speed: 1,750-4,000/min.Blade: 165 x 20mm Bore.Bevel Capacity: 47°.Depth of Cut: @90º: 59mm, @45º: 44mm.Depth of Cut With Guide Rails: @90º: 55mm, @45º: 40mm.Length: 303mm.Height: 265mm.Weight: 5.1kg. The DEWALT DWS520KT Heavy-Duty Plunge Saw 1300 Watt 240 Volt Version.
Cross section allows use on convex and concave surfaces. Tapered very slightly towards point both in width and thickness. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size. 300mm (12in)Cut half round bastard Flat Side: Double CutHalf Round: Double Cut.Tanged
Compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. With rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal. Ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 30mm. Also fitted with a bright white LED with delay feature that improves visibility.
This Faithfull rule is extruded from 50 mm wide anodised aluminium, and is clearly graduated on both edges.It also features a handy metric / imperial conversion chart on the reverse and a hanging hole for storage.Imperial and Metric markings.Length: 1m (39 in)
Bahco S138 1/4in, 3/8in, and 1/2in drive 138 piece metric and imperial socket set that consists of: 12 x 1/4in Hexagon Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, and 13mm. 10 x 1/4in Hexagon Deep Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12, and 13mm. 1 x 1/4in Reversible Ratchet 60 Teeth and Two Component Handle 150mm. 1 x 1/4in Spinner Handle with Two Component Handle 150mm. 1 x 1/4in Sliding T-bar 106mm, 1 x 1/4in Extension Bar 50mm, 1 x 1/4in Extension Bar 100mm, 1 x 1/4in Universal Joint, 1 x 1/4in Bit Holder, and 1 x 1/4in Flexible Extension Bar 150mm. 16 x 3/8in Hexagon Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, and 22mm. 1 x 3/8in Reversible Ratchet 60 Teeth and Two Component Handle 200mm. 1 x 3/8in Spark Plug Socket 21mm (13/16in), 1 x 3/8in Spark Plug Socket 18mm, 1 x 3/8in Spark Plug Socket 16mm (5/8in), 1 x 3/8in Universal Joint, 1 x 3/8in Extension Bar 75mm, and 1 x 3/8in Extension Bar 150mm. 18 x 1/2in Hexagon Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 32, and 34mm. 9 x 1/2in Hexagon Sockets: 3/8, 7/16, 1/2, 9/16, 11/16, 3/4, 13/16, 7/8, and 1.3/16in. 1 x 1/2in Reversible Ratchet With 60 Teeth and Two Component Handle 250mm, 1 x 1/2in Sliding T-bar With Double Function, 1/2in Head 3/8F-1/2in Male Adaptor, 1 x 1/2in Extension Bar 125mm, 1 x 1/2in Extension Bar 250mm, and 1 x 1/2in Universal joint. 1 x Bits Adaptor: 1/4in Square Drive. 4 x Pozidriv Bits: PZ 0, 1, 2, and 3. 5 x Phillips Bits: PH 0, 1, 2, 3, and 4. 3 x Flat Bits: 4, 5.5, and 7mm. 6 x Insert Bits: 3, 4, 5, 6, 8, and 10mm. 9 x Torx Bits: T 8, 10, 15, 20, 25, 27, 30, 40, and 45. 1 x Bits Ratchet, 3 x Hexagon Keys: 1.5, 2, and 2.5mm. 8 x Crow Foot Wrenches: 10, 11, 13, 14, 15, 17, 18, and19mm 13 x Combination Spanners: 7, 8, 9, 10, 11, 12, 13, 14, 15,16, 17, 18, and 19mm. Supplied in a High Density Polythene Case.
IRWIN Record 200-45 Pipe Cutter is perfect for cutting plastic pipe with exceptionally thin cutting wheel and roller.It will also cut copper tube but its use should be confined to one or the other as cutting copper will reduce the effectiveness of the wheel on plastics. Die-cast body with stove enamelled rust resistant finish. Capacity: 15 to 45mm (9/16 to 1 3/4 in).