A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 4.0mm (5/32 in)
Master Lock classic brass padlocks are a tough and reliable security solution. The solid brass body has a modern diamond shaped design and a brushed finish. The extensive range of brass padlock options means there is a Master Lock brass padlock for just about any need. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) is also available. Padlocks are available with 4-pin, 5-pin or 6-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested Uses: Gates, containers, storage units and sheds.The Master Lock 150EURT has the following specifications: 2 x 50 mm solid brass padlocks - 25mm hardneed steel shackle, 7mm diameter - 5-pins - keyed alike
The Paslode IM65 F16 Angled 16 Gauge Brad Nailer for all second fix applications. Improved design featuring key benefits such as an open magazine for easy brad viewing, and a vastly improved line of sight to enable increased accuracy during fixing. Fitted with a no-mar tip for accurate placement and reduced damage to the wood. Quick charge battery with an improved on/off battery system, the new quick charge, long life Lithium battery fires up to 6,000 brads on a single charge (1 hour); 200 brads in just 2 minutes charge. Quick start up with no power cables or air hoses required, the tools improve efficiency and safety in all environments against pneumatic tools. It offers optimal balance, allowing any user to manoeuvre into tight spaces and work all day long without fatigue. Keep one hand free with the improved belt hook design. Consistent finishing due to an improved adjustable depth of drive system, the tool allows seamless fixing without the extra time and cost of re-touching and re-finishing work. Supplied with: 2 x Li-Ion Batteries, 1 x Charger, 1 x High Impact Carry Case, 1 x 32mm Brad Pack, 1 x 38mm Brad Pack, 1 x 51mm Brad Pack and 1 x Cleaning Kit. Specification: Magazine Capacity: 100 Brads. Fires: Nail Length 16-63mm. Cycle Rate: 2-3 Brads/Second. Max Cycle: 1,000 Brads/Hour; 4,000 brads/day. Fuel Cell: Approx. 1,000 Shots. Battery: Lithium 1.25Ah: Up to 6,000 Shots. Charge Time: 1 Hour Max. Dimensions: 301 x 288 x 90mm. Weight: 2.1kg.
3867/1 TS TORX® Bits, stainless Wera Stainless Torsion slotted bits prevent rust on stainless steel fixings caused by contamination from conventional steel tools. Vacuum ice-hardened to the same strength as conventional steel tools, and so suitable for tough, industrial use. Wera Stainless bits feature a unique Torsion zone, extending bit life over standard bits.Use wit Wera stainless Rapidaptor bit holder.Application: For TORX socket screws.1/4in Hexagon Drive, DIN 3126-C 6,3, ISO 1173Tip: TORX, stainless steel.
