Libre
Soutien
* Lining is made of breathable mesh * Double-sided ankle protectors * Contact protection made of antique leather | Article: Stylmartin Arizona Motorcycle Shoes, green, Size 43 | Article: Stylmartin Arizona Motorcycle Shoes, green, Size 43, green, Size 43
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
Squared motorcycle glove is the result of a careful study of the needs of the cafe racer s and scrambler s riders. Made with a blend of neoprene, microfiber and high-strength fabrics, offers the protection of the Warrior technology on the palm.
Technical features:
High strength outer fabric Neoprene inserts Microfiber details on the palm EVA protections on the knuckles Warrior technology protection on the palm Side reinforcements Product Weight: kg. 0,13
Do you want to save the rainwater during a rain storm or do you prefer to travel light and dry? Then the Macna Impact Pro offers a solution! Thanks to the revolutionary direct laminate membrane, the water is not trapped between the outer shell and the membrane, but it runs directly off the jacket. Raintex DL Conventional systems absorb rainwater. The water strikes through the non-waterproof outer layer of the jacket and is then blocked by the membrane. Water is trapped between these two layers, so your coat gets soaked and feels clammy. The remaining water forms a film on the membrane, which is at the expense of the breathability. The jacket is also heavy and it takes a long time before the coat is dried again. And what about the foul smell the next morning? Features
Made of Durylon and Soft flex DL Waterproof thanks to the Raintex Directlaminate membrane Removable thermal lining Extra visible on the sides thanks to Side Eye Vision Vest prepared Ventilation panels in chest and back, lockable with Aquastop Safe tech Protection on the shoulder and elbow backprotector prepared Comfix, collar closure that clicks like a printer but can be attracted as a strap Click Puller, never again a flapping zipper Hot Vest prepared so that you stay nice and warm during colder temperatures Coat Hanger Adjustable straps on the arm Long and short connection runs Back pocket for extra storage space Windcollar prepared (soft neck warmer that is easy to attach by means of a small zipper on the collar)
suitable for the Macna Windcollar Jacket size S / M = wind collars S Jacket size> L = wind collars M
Feature:Lightly and portable, built-in handle, easy to carry.Stylish appearance, popular lines sense.360surround bass sound, sound quality without noise.Play music with LED lights at the same time.Built-in FM radio function, listen to popular music radio, easy operation.Suitable for indoor relaxing or outdoor amusement.Specification:Model: HY-11Material: Plasticbluetooth: V4.2 + EDRRMS power: 10WVoltage: DC 5VBattery capacity: 1200mAhPlay time: About 3-4 hoursSNR: 88dBChannel: 2.1TF card storage: Support max. 32GB(card not included)Frequency: 85HZ-108KHZFunction: bluetooth, AUX play, U-disk, FM radio, TF card playSize: Approx. 15x9.5x24cm/ 5.91x3.74x9.45Package Included:1 X bluetooth Speaker1 X USB Cable
The incomparable café racer style. A totally revolutionized jeans, in details, appearance and comfort. For Special motorcycle lovers, promoter of a style that never sets. Features
Stretch cotton denim Legend is approved Inner is reinforced with 100% Twaron ballistic fabric 100% Cool on Lining approved Knee protectors. (EN1621-1) Adjustable and removable from the outside Ready for Zero-Shock padding on the hips EN 13595-2 and EN 13595-4 tested Belt included Slim fit, Café Racer Style No external stitching
