Peinture à l'huile à la main peint à la main art mural architecture abstraite paysage de rue décoration de la maison décor cadre tendu prêt à accrocher Lightinthebox

The Yale M999 rebated tubular mortice latches are suitable for rebated french doors or internal doors where no locking is required. The latch bolt is withdrawn by spring lever handle from either side but they are not suitable for unsprung lever handles. Polished brass finish.Length: 64mm (2 1/2 in)

Silicone Christmas Lace Cake Fondant Mold Snowman Snowflake Xmas Gift Lace Mat Chocolate Cookies Mold

Totalement Doublé:Oui; Catégorie:Costume; Décoration:Boutons; Saison:Printemps, Août, Hiver, Eté; Tissu:Polyester; Conseils:Ne pas sécher en machine; Fermeture frontale:Veste droite; Y compris:Veste,Pantalon,Gilet; Occasion:Occasion spéciale,Mariage; Type d'ajustement:Coupe Standard; Boutons de Veste:Droit 1 bouton; Fente de Veste:Unique (Centre); Boutons de Veste:4; Motif:Couleur Pleine; Décolleté:Col Châle; Poids à l'expédition:0.9; date d'inscription:12/25/2020; Mode de production:production externe; Longueur de pantalon:; Taille des pantalons:; Largeur d'épaules:; LONGUEUR DE MANCHES:; Tour de poitrine:; Tableau des tailles 1_ID:2:164226; Tableau des tailles 2_ID:708:164227; Tableau des tailles 3_ID:709:164228; Produits spéciaux sélectionnés:COD

This grass trimmer arrives with extra heavy-duty line for heavy-duty weed cutting and has a high torque gear system with E-Drive technology to complete jobs quicker through an improved cutting-rate.It also includes an ergonomic adjustable handle and mid mount motor which ensures for control, balance and comfort, whilst ideal edging of lawns is permitted via its wheel edge guide.

The Forge Tubular Mortice Latch for internal doors can be used with any lever latch handle, lever on rose handle or door knob. Supplied with screws and fitting instructions.Fitting Instructions:1. Mark a height line on door face and edge as well as a centre line on door edge.2. Drill a Ø23mm hole into door edge to accept the latch body, and a Ø19mm hole in door face for the spindle bar measuring from the door edge (43mm for 65mm latch, 60mm for 80mm latch).3. Fit latch and use a pencil to mark around the faceplate. Chisel out so the faceplate lies flush with door edge.4. Transfer the height line onto the door frame and mark a vertical line at half the door thickness from the door stop.5. Drill a Ø16mm hole, 10mm deep at this point and square out with a chisel. Position the striking plate over this hole, mark around with a pencil and chisel out to lie flush.Case size: 65mm (2.5 inch). Backset size: 44.5mm. Forend finish: Nickel. Supplied with matching screws, face plate and strike.

Forest Printed Design Wall Tapestry