Halter Backless Deep V Gather Triangle Bikini Sets

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

handmade from 100% natural boar hair stiff bristles are ideal for creating a rich lather firmness helps to lift the hair for a closer cut perfect bristles for lathering wahl foaming shave gel complete with a stylish stand that allows for drip dry after use

The new Dakar glove combines all the necessary functions for a safe ride in summer! This ultra ergonomic glove offers you an ideal balance between ventilation and protection. The rubber ankle protector features a high impact absorption, guaranteeing the maximum safety standard for this summer glove. The combination of soft goat leather and the multi-stretchy and breathable zones, guarantee a perfect stop on your long and hot trip to the Dakar finish! Features
Goat leather combined with nyspan, air mesh & spandex Rubber knuckle protector Richa gel impact protection Temper foam reinforcements on palm & little finger Conductive fabric on index finger & thumb (for smartphone or navigation system)

Elegant Metal Decoration Boots

Replacement 6 Speed Gear Shift Knob For Ford Focus MK3 Fiesta MK7 C-max MondeoSpecification:Main Colour: Black and SilverLength: about 8.8cmPackage Box Size: about 10cm(L) x 6cm(W) x 5.3cm(H)Speed: 6Thread:NOFeature:- Brand new and durable.- Corrosion resistance.- High quality ABS plastics.- With 6 speed scheme on top. Color would not fade out.- New Beautiful Vintage design gear stick knob. Make your car elegant and fashionable.Installation: Easy installation. Replacementt. Just pull out the old knob, then push the new one in.Compatible: (Just for reference)for Ford Fiesta mk7 2008 - 2013for FordFocus mk2 FL 2008 - 2011for FordFocus mk3 2011 - 2013for FordC-max 2007 - 2010for FordC-max FL 2010 - 2013for FordB-max 2012 -for FordMondeo mk4 2007 - 2013for FordS-max 2007-2013for FordGalaxy mk3 2006 -for FordKuga 2008 - 2013for FordTransit Connect (after lift)(FITS ONLY FOR CARS WITH PUSH-ON REVERSE GEAR)Note:1. Please check the size measurement chart carefully before making payment.2. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)3. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.4. Instruction is not included.5. Just is a gear shift knob, the boot is not included.Package included:1 x Gear Stick Shift Knob

The new Airoh T600 has a Carbon-Kevlar outershell. The visor is Pinlock ready and weighs 1300 grams. The T600 is wind-tunnel tested and has an excellent ventilation system.
Specifications:
2 Shell Sizes Carbon and Kevlar Composite Fiber Externall Shell Wind Tunnel Tested Pinlock Ready Weight: 1300 g Visor Lock System Air ventilation System Ring Helmet Lock