MN-68 2,4 GHz 35 km/h 1/16 Voiture de course de télécommande

This Lamborghini Estoque (2008) Diecast Model Car is Metallic Grey and has working wheels and also comes in a display case. It is made by Whitebox and is 1:43 scale (approx. 10cm / 3.9in long).

This Lancia Stratos (2010) Resin Model Car is Silver and features comes in a display case. It is made by Premium X and is 1:43 scale (approx. 8cm / 3.1in long).

Features: Upgraded metal central transmission shaft 2.4GH 4WD RC car Buggy style 1/18 Scale suitable for indoor and outdoor control High quality car body Four-wheel independent suspension Come with 4-wheel shock absorbers With Proportional Steering function 45km/h above for the high speed 100 meter control distance

This Morris Ten-Four Series II (1936) Diecast Model Car is Black and features working wheels. It is made by Brooklin Models and is 1:43 scale (approx. 9cm / 3.5in long).

Yi HENG YH10HW 2.4 G 4CH 720 P Caméra WIFI FPV Drone Altitude Tenir Une clé Retour G-capteur RC Quadcopter

Features: With electronic compass and barometer. SP Racing F3 Flight Control With Integrated OSD for Multicopter. The SPR F3 builds on tried and tested software, processor and sensor technology to make your aircraft fly like it's on rails. ST debug port on the back of the board have(SWD) and startup mode selection, not deadlock bootloader. There MEGA328 ISP port on the back of the board, will not deadlock bootloader. Looptime up to about 2 times the previous generation based stm32F1 flight control. Use all the features all the time. Connect your OSD + Smartport + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time. The SP F3 runs Cleanflight which can be configured to suit your needs using a cross-platform GUI(Windows/OSX/Linux). Tiny and lightweight. On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork. STM32 F3 support next-generation processor attitude efficient hardware floating-point operations, and faster ARM Cortex M4 core computing. All using 2.54 interface. PDB can be more perfect combination. Full support for OneShot ESCs for easy PID tuning and a sharper response. Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in). Dedicated output for programmable LEDs - great for orientation, racing and night flying. Battery monitoring ports for voltage and current. Sonar support for precision low-altitude hold. I2C port always powered, perfect for external sensors or always-on OLED screen. Buzzer port for audible warnings and notification. F3 + OSD run the company to modify the optimization of cleanflight flight control software(FC).