Spidi L70, thermo vest

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

nullSpecification:LED power: 45W/90W/180W/270WVoltage: 12-24VSize:4/7/13/20InchBeam type: flood+spot combo beam.LED color temperature: 6000KWorking life: 50000 hoursWorking temperature: -40-60degreeWaterproof rate: IP67Material: 6063 Diecast aluminum profile, stainless steel bracket, PC LensApplications:-Indoor and Outdoor uses-Back up light-Off Road Lighting-Truck, Trailer Interior and Exterior Lighting-Construction Lighting-Garden, Backyard Lighting-Boat Lighting-ATV, vessels, bus, off-road vehicles, trucks, fire engines, forlifts, mining, trains, tanks, etc.Package Include:1X LED Work Light Bar

Specification:Input Voltage12 VMaximum Voltage24 AMaximum Flow Rate3.0L/minMaximum Pressure0.9mpaMotor Speed3100-3300(r/min)Using time50 MinBatterycapacity2500 mAPeak machine pressure24.6 barInstallation and Operation:①Dead work: Unload battery pack,install battery pack②Install straight sprinkler head ,after the nozzleis installed,the left and right nozzles are checked to see if the installation is in place.③Connecting pipe,when the water pipe is installed, check the connection of the light pipe.If the water pipe does not fall off ,it has been installed in place.④Connecting self provided plumbing(selection):remove the water pipe connector. Connect the home garden water pipe matching the interface.⑤Open the machine: For the first time, the air in the water pipe should be discharged. The method is to place the washing machine in the position of waist height.(1.5 meters), and then select the high voltage mode. The water enters the water pipe and is ejected from the washing machine before cleaning.The whole process takes about 20 seconds.⑥Selection of water spray effect:Water effect must be selected according to the working conditions, rotating head. 0-40 degree for cleaning,and suitable for irrigation. Do not switch the spray after boot.⑦Clean: please clean the machine with clean water after sea water is used.Security Warning:Battery pack safely warning(1)Do not disassemble, open or cut up battery pack.(2)It is forbidden to short-circuit the battery pack.Do not place batteries i

GORE-TEX® Handschuh mit Gore 2in1 Technologie von Held - höchste Taktilität, wasser-/winddicht, atmungsaktivFutterKammer 'dry' mit Pique-Push-Pull Fütterung (100% Polyester) Kammer 'breezy' ungefüttert MembraneGORE-TEX® Membrane basierend auf PTFE-Material wasser-/winddicht, atmungsaktiv Komfort/AusstattungGORE-TEX® 2in1 Technologie (1 Kammer wasserdicht, 1 Kammer ungefüttert) Klettverschluss an Handgelenk und Stulpe Visierwischer Stretchmaterial-Einsätze (100% Polyamid) auf der Oberhand Oberhand perforiert gestochene Unterhand für perfekte Atmungsaktivität und Taktilität SicherheitKnöchelschutz durch Hartplastikschale Handballen/Handkanten-Verstärkung mit SUPERFABRIC® brand material (32%Polyester, 68% Epoxidharz) 3M-SCOTCHLITE™Einsätze Innenhandverstärkung Damengrößenschwarz 01: D-6, D-7, D-8Damen kurz schwarz 01: K-D6, K-D7, K-D8Damen lang schwarz 01: L-D6, L-D7, L-D8Farbenschwarz 01schwarz-grau 03

Description:Deigned for Xiaomi Ninebot MiniPlus Scooter specially.Puncture resistant,Super skid resistant, super wear resistant.Specification:Color: BlackMaterial:RubberCompatible with:Xiaomi Ninebot MiniPlusPackage Included:1 X 70/80-6.5 Tubeless Tyre

Rooted in surf and skate culture, we went double-barrel with frame materials to create Twoface™, a rare look that pairs lightweight yet durable O Matter™ with lower rims of aluminum. Clean lines keep the look original, and with High Definition Optics® (HDO®), unbeatable clarity and proven protection go along for the ride. Features
Lightweight O Matter™ frame material with Square O-Metal icon accents Precision-formed aluminum lower orbital base lens geometry with HDO®
High Definition Optics® Lenses All Oakley lenses offer HDO® Technology with the following benefits:
Clarity: Conventional lenses can magnify images. HDO® precision gives less distorted vision across the entire field of view. Refraction: With regular lenses, objects aren’t really where you see them. HDO® offers a truer visual image so your brain won’t have to work overtime. UV Protection: All Oakley lenses block 100% of UVA, UVB & UVC rays and harmful blue light up to 400 nm.
PRIZM™ Lenses Prizm™ is a revolution in lens optics built on decades of color science research. Prizm™ lenses provide unprecedented control of light transmission resulting in colors precisely tuned to maximize contrast and enhance visibility.