Stahlwille reversible, fine tooth Ratchet Insert Tool with 60 teeth. Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003. NOTE: Please pay attention to insert size required - 9 x 12 or 14 x 18.CAUTION: A modified torque setting is required if using the size 40HD. MADE IN GERMANY.Stahlwille Ratchet Insert Tool. Size: 9 x 12mm.Drive: 3/8 in.
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
The Dormer P805 Solid Carbide Rotary Bright Burr with ball nose geometry for skip flute grinding and increased strength at the centre. With a reduced chance of swarf congestion and improved cutting action closer to the centre. Produces double cuts, making it first choice for general machining. With an improved ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reduces vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Bright Rotary Burr Ball Nosed Cylinder has the following specification: Diameter: 6.3mm.Shank Diamter: 3mm.Working Length: 12.7mm.Overall Length: 45mm.
The Marshalltown MPB Pre-Worn Plasterers Trowel has a pre-worn shape which eliminates line and ripple marks right from the start. High grade hardened and tempered spring steel blade with bevelled work edges which prevents surface aggregate popping and the correct blade shape, allows novice finishers to be able to produce a professional job. The curved DuraSoft® handle is held firmly by a nut and washer, the blade is made from stainless steel which is easier to clean. These trowels do not corrode and are therefore much longer lasting.Marshalltown MPB14SSD Pre-Worn Plasterers Trowel Size: 350 x 125mm (14 x 5in).
Fitted with a large separate-type metal spike bumper. Spike grips work-piece firmly to provide more control. With a number of safety features, including a mechanical chain brake, double insulation, automatic chain oiling and a kickback brake.
A built-in digital camera with 4x zoom is aligned to the laser measurement device and provides long range targeting, even when the laser dot is not visible. The unique combination of digital Pointfinder and 360° tilt sensor allows measurements which are not possible with conventional distance meters. The DISTO™ D510 uses Smart Horizontal Mode to calculate the correct horizontal distance, taking out the error produced from out of level measurements, allowing measuring beyond obstructions or taking indirect measurements. Bluetooth® Smart technology allows data transfer to smartphones and tablets. In addition to the smart free App Leica DISTO™ sketch, there is also a host of other Apps to allow you to work efficiently and avoid typing errors when recording measurement results. The DISTO D510 kit is also supplied with the following, in a rugged case: Leica FTA360-S adaptor: Sturdy adaptor with fine drive for convenient and precise targeting. The adaptor eases the task of targeting over long distances, and results in minimum discrepancies when taking indirect measurements. Fits all Leica DISTO™ and Lino products with a ¼ “ thread and is designed to be used in combination with the Leica TRI 70 or TRI 100 tripod. Leica TRI 70 tripod: The small portable tripod provides a stable base for more accurate measurements. It is intended for everyday use, features include easy fine adjustment and a bubble level. Extendible length from 0.40 m to 1.15 m. Ideal with the Leica TA360 or FTA360 adaptor. Distance Area & Volume calculation Plus & minus calculation Tilt Sensor (360°) Stake Out Timer Indirect Measurement Pythagoras (3 point) Tracking (incl. min/max) Memory – last 30 measurement recall
