Briwax Natural Creamed Beeswax is manufactured to a traditional formulation using only refined natural beeswax, linseed oils and genuine turpentine. It cleans and revives the natural colour of wood and enrich the patina of all good furniture. The wax is easy to apply with a soft cloth, leaves a pure, clean aroma and produces a deep, rich sheen. Ideal for restoration on antique furniture. Colour: clearSize: 250ml.
Forged from chrome alloy steel. The jaws are fully hardened and tempered. The polished head is nickel plated chrome plated to protect against rust. The 23° head angle provides better accessibility to the nut.Size: 200 mm (8in). Jaw capacity: 24 mm.
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.The Faithfull FAIHC2XSSB Stainless Steel Hose Clip comes in the following:Size: 2X.Adjustment: 45 - 60mm.
A slimline design and soft-grip surfaces make for a comfortable, in hand fit. It also has an automatic spindle lock, which makes it easy to change tools, a 10mm quick-change drill chuck and an LED light to illuminate the work area.
These 23 gauge mini pins are headless fine wire pins that are indispensible for fine molding and trim work. As the pins are completely headless , the wood closes over them after driving eliminating the need for time consuming fillingThey are also excellent for temporary tacking whilst glue dries, as they can be removed with little damage to the work.For use with the Bostitch headless pinner.Length 12 SKU 1061200SE Finish STANOX (Copperwash)Description Mini Pin 12mm Stanox 20m Qty per box 20000 Suits: TU216-2330 Tacker
Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5
These Faithfull Hexagon Sockets are professional, high quality 3/8in drive metric sockets forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Faithfull sockets have a hexagon design that gives an accurate fit on both nuts and bolts and the chamfered end allows easy nut location and entry.The FAISOC3823 Hexagon Socket has the following specifications: Drive: 3/8 inch square. Size: 23mm Hexagon.
