Boxed SS Tee

Features
water and windproof due to heavy duty PU laminated polyesterfabric waistband and leg cuffs with elastic reflective BÜSE letterings on left leg reflective piping with hook-and-loop fastener and with a long zip on the calves

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.

In seinem Design und seiner Farbe (weiß/rot-orange/schwarz) ist der IMS-zertifizierte Trainingsball Jako Ball Goal Classico MS ein absolutes Muss für jeden Trainings- und Spielbetrieb. Für beste Aerodynamik ist dank der traditionellen 32-Panel-Konstruktion gesorgt. Bester Grip am Trainings- und Spielball entsteht durch ein robustes, abriebfestes PU-Obermaterial. Der Goal Classico MS hat nur einen minimalen Luftverlust was die Blase aus weichem Butyl ermöglicht. Dieser Ball überzeugt auf allen Linien für jeden Trainings- und Spielbetrieb mit seiner Qualität, Design und Farbe. IMS-zertifiziert: International Matchball Standard (IMS) - diese Bälle entsprechen mindestens den Normen des International Matchball Standard (IMS), qualitätsidentisch mit FIFA Inspected. Sie können bei jedem offiziellen Spiel auf internationaler oder nationaler Ebene eingesetzt werden. Alle Tests werden von neutraler Stelle durchgeführt - gemäß den Regeln der FIFA.Eigenschaften Material: PU 32 Panels: Traditionelles Design, maschinengenäht Die 4,0 mm Dämpfungsschicht garantiert bestes Ballgefühl und FormstabilitätButyl-Blase: Damit nur minimal Luft entweichen kann, ist die Blase des Balles aus weichem Butyl IMS Logo aufgedruckt

0 - - glass reinforced nylon composition - - - - - - -

Welcome to our shop, dear customers. All the soccer uniforms will come with badges and logos,.syi

Der Performance Ball ist ein handlicher Medizinball mit optimalem Grip, der speziell zum Einsatz im Training verschiedenster Ball- und Mannschaftssportarten konzipiert wurde. Er ist in 2 verschiedenen Gewichtsstufen erhältlich und eigent sich perfekt zur Schulung und Optimierung von Hand-Augen-Koordination, Reaktionsvermögen und Bein-Schnelligkeit. In unseren BAX-Ausbildungen wird der Performance Ball - 4 lbs. verwendet. Produktdetails Material: Nylon, Granulatfüllung Farbe: rot-schwarz erhältlich in den Gewichtsstufen 2 lbs 0,9 kg & 4 lbs 1,8 kg leicht zu reinigen