Libre
Soutien
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Specification:1. Pressure range: 100 bar ~ 220 bar (1400psi ~ 3200 psi), both home-use and professional pressure washers work perfectly.2. Foaming performance: Plentiful, thick and high-dense foam, heavy duty and durable design.3. Material: solid brass and metal body, stainless steel nozzle, nylon cover, and HDPE bottle.4. Capacity of bottle: 1 L5. Adjustable consumption of snow foam cleaner, Variable angle spraying pattern from pencil to 60 fan, resistant to chemicals.Package Included:1 XHigh Pressure Soap Foamer
Specification:Color:BlackShape: 3D stereoSize:137 x 87cmMaterial:Ethylene Vinyl Acetate(EVA)Compatible for:Hyun dai Tucson 2015-2017Features:1. Surface, the bottom of the use of EVA foam forming a one-time hot pressing, the surface pressure pattern, with waterproof, anti-skid and other functions;2. According to the bottom of the car body-shaped design, three-dimensional high-side, one molding, fully sealed to protect more thoughtful.3. Easy to clean, rinse with water or soapy water, that is washed with.4. Lightweight design, more convenient to carry.3D shape, innovative design PE waterproof material. Disc high-edge design, to prevent sand, mud, snow overflow pollution inside. Wear, durable, long life, ultra-lightweight, easy to clean out. Essential.To prevent sand, mud, water, snow, oil stained after the trunk floor. No matter where fresh food, vegetables and fruits, gardening supplies, camping supplies, repair tools, and even building materials, folding bicycles and other items easy to dirty cars. Can be removed anytime, anywhere clean. Tailored specifically for your cars interior contours, creating a good, can make full use of the reserve space.Package Included:1 x Rear Trunk Cargo Mat
Die SCOTT Turn Pro DP Jacke mit DRYOsphere Membran ist einfach wie geschaffen für den Kampf gegen die Elemente und ist genauso robust wie bequem. Zu den Sicherheitsmerkmalen zählen Ellbogenverstärkungen, Protektoren an Ellenbogen und Schulter sowie eine High Density 500D Polyamid Konstruktion mit Hitena™-Verstärkungen. Diese Jacke ist bereit für starke Beanspruchung unter den härtesten Bedingungen. D-Sondergrößen für breitere Körper.Bequemer Kragen mit weicher Einfassung Automatisch schließender Kragen mit Magnetveschluss, mit zweiseitigem YKK FlexFix® avant Druckknopfsystem, sodass der Kragen für die gewünschte Belüftung offen oder geschlossen getragen werden kann. Temperaturkontrolle, dank Belüftungssystem an Brust, Rücken und Ärmeln Nierenwärmsystem auf der Innenseite Wasserdichtes Labyrinth-Verschlusssystem Front-Flap-Isolierung auf der Innenseite Safe-Tech Protektoren an Schultern und Ellbogen. Tasche für optionalen Rückenprotektor mit Größenhinweis Hybrid Ellbogenprotektor-Tasche für zwei Größeneinstellungen Reflektierende Elemente für perfekte Sichtbarkeit 76cm-Verbindungsreißverschluss 1 wasserdichte Taschen innen Brusttaschen 2 wasserdichte Taschen am Bund, inklusive Handwärmertaschen Verstellsystem an Kragen, Taille, Saum, Ärmeln und Bund
Neue Passform!; Vorgeformte Passform für Performance; Ratschen-Verschlusssystem an der Taille; Komplett luftdurchlässige Einsätze aus Netzgewebe in den Schlüsselbereichen für optimale Belüftung und Kühlung; Einsätze aus Rindsleder auf der Knieinnenseite; Einsätze aus 2-fach Stretch im Bereich von Kniekehlen, Waden und Schritt; Bewegliches Stretch-System im Steissbereich für maximale Beweglichkeit ohne Verrutschen der Hose.
Description:1. Non-directional 5 spoke steering wheel2. Universal fits standard 3/4 ( 19 mm ) tapered shaft3. Commonly used on most marine boats, vessels, yacht, pontoon boat and so onSpecification:Material: Made of 304 Stainless Steel W/SS 316 Casting HubS.S. Wheel With Finger Grips And PVC Foam CoverColor: BlackSteering Wheel Outer Diameter: Approx. 343mm/13.5 inchSlant angle : 25Assembly Hub Height: Approx. 40 mm/1.57 inchHub Diameter: Approx. 85 mm/3.35 inchDiameter at the larger opening : 3/4 (19mm)Diameter at the small opening : 2/3 (17mm)Note:Please allow slightly difference due to manual measurement. Color may be slightly different since different monitor. Thanks!Package Included:1 X Marine Boat Steering Wheel with Auxiliary Knob
