The patented design of the BMS 4592 is a result of extensive dedicated research and development providing dramatic improvement in dynamic response, clarity and transparency. The BMS annular midrange diaphragm covers the frequency range between 300 and 7000 Hz with a smooth, linear response. The large diaphragm excursion of max. + / - 0,8 mm results in high output and increased power handling up to 1300 W peak. The ultra light annular diaphragm for the high range offers exceptional transient response with very high efficiency from 6 to 22 kHz. The unique voice coil technology employs a light weight Copper Clad Aluminium wire wound inside and outside of the Kapton? former to improve the heat dissipation, dramatically increasing the acoustic output and reliability of the driver while minimises the power compression. The use of high grade neodymium magnets provide improved performance while significantly reducing transducer weight. Technische Daten Extended Bandwidth (300 - 22000 Hz) Neodymium Magnet Assembly With two subsystems in one, each Driver covers a smaller Frequency Range for increased Power Handling, high Dynamic and extremely low Distortion Excellent Phase Coherence Perfect Time Alignment without Problems of Multi-Source Interference Ultra light Weight
Features:
Audio transmission kit for electric guitar.
Transmission distance of 30 meters, without the interference of external signals.
Comes with 2 audio connecting cables (3.5mm to 6.3mm 6.3mm to 6.3mm), easy to use with guitar, bass, etc.
LED power indicator for working status and low battery warning.
Beschreibung OMNITRONIC ALT-105 Audio-Link-Modul WAMS-05 Multifrequenz- Sendeeinheit für W.A.M.S.-05 Ausstattung: Multifrequenz- Sendeeinheit für W.A.M.S.-05 Sender mit UHF-PLL-Technik, passend für W.A.M.S.-05 System Zur drahtlosen Übertragung des Audiosignals an Empfangseinheiten weiterer W.A.M.S.-05 Systeme (Audio-Link-Betrieb) Betrieb im störungsarmen UHF-Bereich (863,1-864,9 MHz) mit 16 schaltbaren Frequenzen LCD-Anzeige für Kanal und Frequenz Lautstärkeregelung LEDs für Träger- und Audiosignal Anmelde- und gebührenfrei in der EU
Features:
Aluminum alloy housing design, low noise and stabilized voltage supply.
A lightweight power supply with 1 input jack and 10 output jack.
Powers eight 9V guitar effects, one 12V guitar effectsand one 18V guitar effects all at once without losing any signal intensity.
Blue LED for power lights in normal using mode.
When output jack has short-circuiting situation, thecorrespondingLED light go outautomatically.It goes in self-protection mode and it will auto-restart in about several seconds once you unplug the guitar effects.
Foldback current limiting circuit provides ultimate protection against power shortages and overloads.
The maximum current of No.1 to No.7 output jacks is 100mA for powering normal guitar effects. The maximum current of No.8output jack is 500mA for powering digital guitar effects and low power digital guitar amplifier.
Adaptor of 100V-240V input and 18V output.
Enjoy the quiet and cool operation of a fully regulated power supply.
Connections:
1)Plug the included adaptor into 18V in jack.
2)Connect the adaptor to 100-240V power, the blue LED will light, if you use other adaptors, make sure the output is 18V rated at 1000mA and the plug is positive barrel and negative center type.
3)Connect your 9V guitar effects to the eight 9V outlets with included DC cables.
4)Connect your 12V guitar effects to the 12V outlet with included DC cables.
5)Connect your 18V guitar effects to the 18V outlet with included DC cables.
SPL-Anzeige mit Messmikrofon Das Dateq SPL-D2MKII ist eine Schallpegelanzeige, die sowohl als eigenständiges Gerät, als auch in Verbindung mit dem SPL5TS Limiter betrieben werden kann. Die Anzeige mit hocheffizienten zweifarbigen LEDs ausgestattet und auch über größere Entfernungen gut lesbar. Bei Verwendung mit dem SPL5TS wird der Pegel des Limiters angezeigt. Die Balkenanzeige kann wahlweise für den Schallpegel oder die Pegelreduktion konfiguriert werden. Für die Nutzung als eigenständiges Gerät muss das mitgelieferte Messmikrofon angeschlossen werden. SPL-D2MKII zeigt dann immer den aktuell gemessenen Schallpegel an. Wird der vordefinierte Pegel überschritten, so wechselt die angezeigte Farbe von grün auf rot. Dies eignet sich z.B. als Warnanzeige für Live-Bands. Für das Messmikrofon stehen drei Messkurven zur Verfügung (ANSI-A, ANSI-B, ANSI-C), die über eine PC-Software eingestellt werden können. Technische Daten SPL-Anzeige mit großen und deutlich erkennbaren Ziffern Als eigenständiges Gerät oder Erweiterung des SPL5TS Limiters nutzbar Automatische Helligkeitsanpassung in dunklen Umgebungen Farbänderung bei Überschreiten des Grenzwertes Sanktionsschalter in Verbindung mit der SRL-1 Relais-Box Drei Messkurven (ANSI-A, ANSI-B, ANSI-C) Konfiguration via PC-Software (USB) Modell SPL-D2MKII Anschlüsse XLR, Klinke, USB Tech. Daten Drei Messkurven (ANSI-A, ANSI-B, ANSI-C) Spannunsgsversorgung 24 V DC, 9 W Abmessungen, Gewicht 255 mm x 125 mm x 47 mm (B x H x T), 1 kg