Hammerite 'Direct To Rust' Metal Paint - Hammered Black 2.5L

This handy Faithfull Multi-Meter can be used for the measurement of DC / AC voltage, DC current and Resistance and for Diode and Transistor testing and Audible Continuity testing. This meter is ideal for performing many checks used in radio and electronic testing, car electrics, household appliances, portable tools and similar equipment. All test functions are easily accessible by rotating the 20-position range selector switch to the required function. The multi-meter has many features to facilitate safe use including overload protection, recessed input terminals, automatic negative polarity and over-range indication. Additional features include a rubber protective housing with integral stand for easy visibility, a large 3½ digit LCD backlit display with auto power off and low battery warning. Features: 20-position rotary function and range selector.Precision reading and stable performance.Recessed input terminals for added safety.Supplied with test leads, battery and instruction manual.Overload protection.Easy to read backlit display panel.Auto power-off.Low battery indication.Protective rubber housing with integral stand for easy visibility.9 Volt 6F22 Alkaline Battery included. Specifications: Display: 3½-digit LCD, Max reading 1999.Measuring method: Dual-slope integration A/D converter.Operating temperature: 0°C - 40°C (32°F -104°F).Dimensions: 138 x 69 x 31mm.Weight: approx. 170g (including battery).

Mini herramienta de recogida magnética portátil Imán extensible Herramientas de mano de pluma de recogida de mano

Smooth jaw parallel snipe nose plier ideal for work in confined areas.Size: 125mm (5in).

The Carpenters TC hammer is an ergonomically designed hammer, forged in one piece with an I-profile for increased durability with a vibration damping urethane plug. The shape of the striking face is right angled to the handle. The claw opening and angle give the best possible grip on the nail and it has a thin, strong claw for easy access without leaving marks, and it is rounded to prevent it tearing your trousers. The ergonomically designed handle with clear end stop is available in two sizes: L and XL.Handle size: XL.Overall weight: 720g / 26oz.

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

These Britool screwdrivers have a bi material ergonomic comfortable and effective handle. In addition, they have a round chrome plated blade in chrome vanadium steel each with a sand blasted tip. The 8 piece Britool BRIE160907B screwdriver set includes 2 x Parallel slotted screwdrivers 3x50 and 4x100mm2 x Flared slotted screwdrivers 5.5x125 and 6.6x150mm2 x Pozidriv screwdrivers PZ1x100 and PZ2x125mm2 x Phillips screwdivers PH1x100mm and PH2X125mm