The Union 3K75 series 5 Lever Mortice rollerbolt sashlocks are suitable for use on timber doors hinged on the left or right and are also suitable for use on doors up to 50mm thick. The lock has a deadbolt operation and is locked or unlocked by key from either side with the latch bolt being withdrawn by a lever handle from either side. It has force resistant, anti-pick and anti-saw security features and is available with square forend and striking plate with a 14mm bolt throw. They are also pierced to accept bolt through furniture. The 3K74E series locks are recommended for use on a front door in conjunction with a BS standard nightlatch. They are also covered by a 25 Year guarantee. Deadbolt: Brass, with hardened steel rollersLatch Bolt: Roller bolt (non handed)Follower: Sintered Iron, 8mm squareKeys supplied: Standard differ supplied with 2 keys. For locks to pass please specify number of keys required.Key Blank Number: B-K722 (standard)Cut Key Number: B-5LCNot suitable for master keyingRebate Kit B-3K74R (13mm, 19mm and 25mm) EN1634-1 assessed for use on 60 minute timber fire doorsVisi packed.Finish: BrassSize: 67mm
The Pro Metal Quick Connect hose connectors from Hozelock have zinc die-cast sleeve, ensuring that they are strong, durable and scratch resistant. The large bump ring protects greenhouses and cars from damage. The Aqua Stop connector incorporates an internal valve that stops the water flow when an accessory (e.g a spray gun) is disconnected. This saves having to go back to the tap to turn the water off when switching between accessories. It also helps save water in the garden because it stops the water flow so less water is wasted. All internal parts are made from ultra tough engineering plastics for a long leak free life. The connection to the tap is guaranteed secure up to 10 bar, thanks to a triple locking system and the sleeve is easy to use even when wet because of the twin soft touch pads. The hose is firmly connected by barbs that connect with the inside and outside of the hose. Hose kinking, swelling, and leaking at the connection point with the fitting are virtually eliminated due to the ingenious, flexible hose-tail on the nut.This hose connector is best used at the gun end of a hosepipe. Suitable for use with all 12.5mm (1/2 inch) and 15mm (5/8 inch) hose.
Tissu:Polyester; Pour:Homme; Type d'ajustement:Standard; Décolleté:Revers en Pointe; Taille Spéciale:Taille Asiatique; Type de vêtements d'extérieur:veste; Page de garde:FF; date d'inscription:10/11/2019; Tour de poitrine:; Longueur:null; Largeur d'épaules:; Produits spéciaux sélectionnés:COD; UK:; EU:
Hose Mender 1/2in.The handy hose mender doubles as an extender for connecting two lengths of hose to create a longer run.Manufactured from high quality brass.Suitable for use with all 1/2in bore garden hoses and compatible with all other UK water fittings.