Libre
Soutien
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
Casque Astone GT800 Evo Kaiman Les casques Astone couvrent tous les segments du marché pour répondre aux différents besoins des consommateurs, des casques complets aux casques croisés. Cette série de casques allie sécurité, esthétique et confort tout en se positionnant comme le meilleur rapport qualité/prix.fonctionnalités: système de ventilation protecteur du nez boucle micrométrique Pare-soleil visière auto-régulatrice Thermoplastique (ABS) Doublure intérieure amovible/lavable Visor Pinlock prêtSpécifications: ECE 2205 Poids: environ 1450 (-50g)Tailles: XS: (53/54) S: (55/56) M: (57/58) L: (59/60) XL: (61/62) XXL:(63/64)Contenu: 1x Casque Astone GT800 Evo Kaiman
Description:Flexible RGB LED Flashing Light Strip Kit, Brightly light up your Motorcycle in MultiColor.4 Button Metal Key Fob Wireless Remote Controller.Very Slim, Easily Hidden Control Box.These slim 10mm strips bend and Conform around corners on the body panelsand chassis anywhere desired on the Motorcycle.Power the Light Strips on and off using the included wireless remote unit from up to 100 feet away.The waterproof wires are put in to the PVC tubes sealed with pouring glue.Feature:Stylish designed, Brightly Color4 Button Wireless RemoteWaterproofSpecification:RGB ColorMaterial: Waterproof PVC tubesStrips wide: 1cm/0.4Strip Length: 10cm 4 / 20cm 8 / 30cm 12 / 40cm 16 / 50cm 20Total LED Qty: 540 LEDsVoltage: 12v DCOutput Power: 150WBattery Type: 27A 12V battery (package NOT included battery.)RF Remote Control: About 1-10 metersFitment: Universal for Car / Bikes / Motorcycles / Motorbikes / Truck / Lorry / Boat etc.4 Button Function:A: Short Press 1-15 Times, 15 Kind Of Static Color ,16-17th Times, 15 Color JumpingMillion Color fading,Long Pressing to make the Static Color Dimming. Under the JumpingFading,Long Pressing BC Button to change the SpeedB: Short Press to Make the Select Color FlashingC: Short Press To Make The Select Color FadingD: On/Off, Long Pressing To ResetPackage Included:4 X 4 LED Strips4 X 8 LED Strips4 X 12 LED Strips4 X 16 LED Strips2 X 20 LED Strips1 X Remote Control (without battery)2 X Blade Terminal1 X 12 Way Splitters
Giving riders comfort and support in a traditional package. Design & Function:
Instant step in comfort with minimal break in Controlled ankle support with Zero Bulging Sleek medial design with integrated rubber burn guard for a precise connection with the bike Injection molded plastic shin plate, calf guard, medial and toe cap Instinct buckle system with 2 into 1 lower strap design Premium foam ankle support with suede anti-slip in heel to keep foot in place Exclusive Fox Duratac outsole Integrated steel shank in midsole for added support
2in1 short jacket with breathable Cordura® AFT Features
500 D Polyamide 500 D Cordura® ribstop reinforcements on crash zones (100 % Polyamid) Cordura® AFT panels for best ventilation 3M™ Scotchlite™ reflectors high quality shoulder caps detachable Humax® membrane: 100 % waterpoof, 100 % windproof, breathable YF protectors on shoulder and elbow according to EN 1621-1:2012 elbow protectors are adjustable in height upgradable with SAS-TEC chest protectors SC-1/CP-2 upgradable with back protector SAS-TEC SC-1/11 for sizes XS - S upgradable with back protector SAS-TEC SC-1/12 for sizes M - 4XL connection zip safety seams
Specification:Color: BlackLight Color: Xenon White(6000k - 7000k)Size:As the below picture shownBistance between bolts:113.1mm/4.45Material: plasticsRated Voltage: DC 12VWattage:5WLifetime:5,0000-10,0000hrsLuminance:1,0000-1,2000MCDPower line length:150cmNumber of LED Per Piece: 6Number of Pieces: 2Feature:1.100% Brand new and high quality.2.It is durable and Waterproof.3.L Shaped Design and long LED service life.4.Does Not increase fuel consumption and uses 35% lower power, which results in Increased Battery Life.5.Automatically switched On/Off.(On/Off Switch is not included)6.These LED daytime running lights can not only be used as a decoration, but also the main function is to improve driving safety.Fitment:Fit all 12V vehicles such as Cars, Trucks, SUVs, and etc.Note:1.Please ensure what you received is as expected and check compatibility with measurement before purchase.2.Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)3.The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.4. Manual is Not included in the package.5.On/Off Switch is not included.Package includes:2 x Daytime running lights
