Features Carbon knuckle protector Slider on bottom palm Sidewall reinforcement Mesh on backhand Elasticated wrist with strap Gusset on backhand Screen Touch System : index compatible with touch screens PSA certified
3in1 eye-catching touring jacket with lots of storage space Features 500 D Polyamide Hitena® reinforcements on crash zones (100% Polyamide) 3M™ Scotchlite™ reflectors AirVent ventilation zips detachable Humax® membrane: 100% waterpoof, 100% windproof, breathable detachable thermo lining SAS-TEC shoulder and elbow protectors according to EN 1621-1:2012 (protection level 2) elbow protectors are adjustable in height upgradable with back protector SAS-TEC SCL-S 19 for sizes 34 - 36 upgradable with back protector SAS-TEC SCL-L 19 for sizes 38 - 48 2 waterproof outer pockets, 1 waterproof inner pocket safety seams
TS-BT35F01 3.5mm bluetooth Audio Transmitter Receiver A2DP Stereo Dongle Adapter for TV PC SubwooferThis is a High Quality 3.5mm bluetooth Stereo Audio Transmitter.It compatible withHi-Fi, PC, PSP,Nintendo DS, CD/DVD, lPod,lPhone, lPad, MP3, MP4, PDAs, PMP playerwith 3.5mm audio socket, enabling such devices to become bluetooth and you canenjoywirelessly with your bluetooth stereo headsets, receivers.Feature:1.Transmits high fidelity stereo music to bluetooth receiver device,enjoy the music without wire restriction.2.Connect to bluetooth-disabled audio device via 3.5mm audio plug,make it able to work with bluetooth A2DP headset/speaker.3.Plug and play, no need installation.4.Built-in rechargeable li-battery, can work for 5~7 hours after fully charged.5.Compact size, portable and lightweight.Specification:bluetooth version2.1+EDRbluetooth profilesA2DP / AVRCPFrequency2.4GHz~2.4835GHzEffective rangeup to 10mInput voltageDC 5VCharge timeApprox.2~3 hoursWork timeApprox. 5~7 hoursPackage Included:1 X bluetooth Audio Transmitter1 X USB Charge Cable1 X User Manual(English)
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows. OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471 CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet. INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part. INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation. The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses. weigth: ca. 1000gr
Jopa MX S18 pants with the print directly sublimated in the fabric guaranteeing you the brightest colors. Features Dutch hand made: The MX Gear is completely produced in the Jopa studio in Enter, Netherlands, ensuring you a high quality product. Usage of best materials: Kevlar for the knees, high quality Cordura and stretch materials. Comfortable fit: multiple stretch areas to be sure the pants is comfortable yet still durable. Directly sublimated into the fabric for optimal colors which stays bright after washing several times.
