Merlin Vixen Ladies Motorcycle Hoodie, black, Size S for Women, black, Size S for Women

LS2 FF327 Challenger
UV-resistant layer security certification 3 bowls made of HPFV
Shell sizes
LS2 offers multiple case sizes, custom-sized EPS protective films and our high-performance, high-quality comfort filler as well as 3D laser-cut plastic foam for a perfect fit and comfort throughout the day.
It is made from HPFC
The high performance fiberglass composite material consists of carefully layered layers of a unique resin preimpregnated fiberglass fabric to form a tough, ultra-light and inflexible casing or shell that disperses impacts in a safer manner.
Cooling system
LS2 helmets have a so-called "Dynamic Flow-through Ventilation". Multiple adjustable inlet ducts and EPS damping with air ducts in conjunction with the rear spoiler and exhaust ducts provide permanent ventilation to provide the driver with cool and comfortable conditions.
Metallic security badge
This small metallic triangle is an exclusive LS2 feature, which additionally strengthens the connection of the helmet band with the helmet.
Quick release
The metal buckle combines with a high-quality chin strap with a plastic tongue with teeth. When closing you hear a soft "click". As far as locking until you reach a comfortable but tight seat. Pull the ribbon to unlock the tongue. Further adjustment options are provided by the chinstrap on the side of the metal buckle.
Emergency release system
Our emergency release system allows the emergency service to remove the helmet pads and thus create an additional space for helmet removal with minimal movement of the injured person s head and neck. It is recommended that someone holds the helmet to avoid movement when removing the padding. Slide your finger into the red ribbon and gently pull on it to remove the pads. Slide the side pads over the straps and remove them from the helmet.
Visor
LS2 visors are made from 3D optically correct "A-class" polymers, a space exploration polymer with high resistance to impact energy and maximum visibility. Our visors are stable, scratch-resistant and UV-resistant. All this combined with the ultimate PINLOCK technology provides the most advanced anti-fog standard.
Quick disassembly system
This system (patent pending) simplifies the change of the visor with the bare hands. The spring detent built-in with detent pin secures a perfect fit without air gaps when the visor is closed.
Comfort lining
All LS2 helmets have removable and washable inner lining to keep them fresh and new. Our anatomically designed cheek pads are based on LS2 s 3D laser technology for a perfect fit. We use hypoallergenic substances, which carry away the moisture, in order to ensure the driver always pleasant conditions.
Chinguard
A high-quality fabric placed in front of the chin reduces the airflow in the driver s face and makes it easier to drive. The chin guard is removable when hot.
Hypoallergenic
We use hypoallergenic substances that support the moisture transport and ensure a comfortable fit.
Laser cut upholstery
Foam with different densities is laser cut in 3D and adapts perfectly to the driver s head shape.

* sizes: 41 - 49 * lightweight alloy buckles * grip guard (exceptional grip of the bike, as well as offering a heat resistant padding against your inner leg) | Article: Gaerne SG-12 Motocross Boots, black-white-red, Size 43 | Article: Gaerne SG-12 Motocross Boots, black-white-red, Size 43, black-white-red, Size 43

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Weather type
Summer
Lining
Mesh
Visibility
Side Eye Night Eye
Ventilation
Mesh panels
Protection
backprotector prepared protector shoulder & elbows
Other specs
Coat hanger Jeans loop
* "lighter picture" shows the night eye effect

Description:Overheat protectionShort circuit protectionReverse connection protectionLow voltage protectionRepair ChargingFull StopSpecification:Type: 110V, 220VNote: Please kindly leave us a PAYPAL NOTE specifying your prference, otherwise we will send it in Random.Dimension: 155 x 120 x 70mm/6.10 x 4.72 x 2.76Clip Wire Length: 85cmPower Cable Length: 120cmInput Voltage: 100~140V,220~260VOutput Voltage: 12V/24VPower: 240WFrequency: 50-60HZ-Application: best suitable for 120AH lead acid batteries(including wet and dry)Working Modes:Constant Current ModeConstant Voltage ModeTrickle ModePackage Included:1 X Car Battery Charger1 X User Manual

Description:Environmental protection and high temperature.The use of environmentally PC material has good heat resistance can effectively prevent the damage the internal material.High quality, Long-lasting, On/off faster response time, Super brightEasy installation, no modification requiredThe tail,brake and turning signals are all integrated in oneSpecification:Material: ABS PlasticLens Color: ClearThe position: AfterLight color: pictures showSize: pictures showBefore ordering, please ensure that this part is suitable for your motorcycleDecoration:FOR Kawasaki Z1000, 2014, 2015, 2016Package Included:1 X Motorcycle Tail Light