Teng M380520C Regular Socket 20mm 38in Square Drive

Rapid No. 13 precision cut fine wire staples are made from high-performance stainless steel for strength and durability. The thin wire makes the fixed staple almost invisible, ideal for craft and textiles where the staple will have minimal effect on the fibres. Stainless steel wire classification class 2 AISI 304 ideal for outdoor use or use in humid areas. Type: 13 (stainless steel).Size: 6mm leg lengthQuantity: 2,500. For use with the Rapid MS610, R13, R83, R23, R30, R33, MS813, R19, ESN113 and R213 tackers.

Style:Contemporary; Finish:Electroplated; Faucet Type:Premium High Pressure Dual Shower,Body Jet Massage,Pressure Balancing valve,Thermostatic Mixer valve,Rainfall Shower Head System,Shower System; Installation Type:Mount Outside; Number Of Handles:Single Handle; Cold and Hot Switch:Yes; Valve Type:Ceramic Valve; Handshower Material:Stainless Steel; Faucet Body Material:Brass; LED Power Source:Water Flow; LED turns Blue between:0-38; LED turns Green between:0; LED turns Red between:41; LED begins flashing between:41; Rain Shower Included:Yes; Shower Arm Included:Yes; Handshower Included:Yes; Bodysprays Included:Yes; Valve Included:Yes; Handle Material:Zinc Alloy; Drain Included:Yes; Brand:Sprinkle; Features:Rainfall Shower,pullout,LED,Handshower Included,Waterfall; Shipping Weight:6.760; Net Weight:0.000; Listing Date:10/19/2020; Production mode:Self-produce; Special selected products:COD

The Faithfull FAIOCP50205L has an efficient lever action pump for use with steel barrels. This heavy-duty pump features a diecast aluminium head and bung nut, with a zinc plated 38mm curved discharge spout and telescopic suction tube that adjusts to suit the barrel size. The Faithfull FAIOCP50205L is for use with petroleum based liquids only with the following specifications: Delivers: 300ml (10 fl oz) per stroke. Fits: 50 to 205 Litre (15 - 55 gal) drums.

Evolution's Electric Disc Cutter easily cuts Concrete, Stone, Brick, and Paving, even reinforced concrete, with the supplied diamond blade.The powerful 2400W motor makes easy work of the most robust materials and because it is electric there are no harmful fumes, making it ideal for work in enclosed areas.The ergonomic support handles are ideally positioned for perfect balance when cutting and the spindle lock mechanism means blade replacement is quick and simple.Technical Specifications:Motor: 2400WSpeed: 5000/minDisc Diameter: 305mmDisc Thickness: 2.0mmBore Diameter: 20 / 22mmDisc Weight: 1.78kgMax Cutting Depth: 100mmMachine Weight: 9.5kgProduct Dimensions: 464x575x390mmRecommended Maximum Duty Cycle: 20minsSound Pressure Level (Under Load): 102.4dB(A)Vibration Level: 4.8m/s2Gross Weight: 11.82kgIncludes:Dust Extraction PortSpannerOperator's Manual1 x Blade

Traditional style white plastic dimmer switches.Available in 1 or 2 gang.1 Gang dimmer switch for loads up to 250 Watts

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S