20-33mm Titanium Alloy Key Ring Pocket Split Keychain Buckle Circle Clip Motorcycle

Safety
Prepared for back protector Lev. 1 Warrior Protectors EN 1621-1 Level 1 on shoulders and ellbows
Comfort
50% waterproof garment prepared for thermo lining L30 prepared for H2Out lining X47 elastic knitted cuff
Performance
Step-in Clothing: layered clothing system optional
Materials
sheep leather, 0.7/0.9 mm thick, extra comfort leather
Maintenance
Do not Wash Do not bleach Do not tumble dry Line drying in the shade Do not iron Do not dry clean Do not wring

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

* REV'IT! by Vibram® outsole * rubber abrasion edge * reinforced heel  | Article: Revit Gravel OutDry, black, Size 39 | Article: Revit Gravel OutDry, black, Size 39, black, Size 39

Performance Shock
Removable composite protectors certified to EN 1621.1 Standard
Performance Main materials
Quickdry fabric Boomerang net fabric
Comfort Ergonomics
Jacket-trousers fastening system Waist adjustment Zipper at calf
Comfort Temperature
Sanitized® lining
Others General
Reflective Inserts 2 outside pockets on front

Matching the blouson, the Track Leather Pant is designed with the same athletic fit and style. Also emphasizing protection, this leather pant incorporates Hybrid protector pockets on the knees to ensure the highest level of safety while riding.
Features
Stretchable waistband for best fitting High waisted kidney area Stretch panels for best action SAS-TEC protectors at knee. Pocket for optional hip protector Hybrid knee protector pocket for two height positions Double fabric layers for reinforcement at knee and bottom 76cm long connection zipper 2 outer pockets Snap and hook closure

Le polymère de Salvo genou Zip roches un design super confortable et ergonomique et un protecteur de SAS-TEC ultra-léger, décharge haute. Panneaux de Kevlar renforcées résistance à l’abrasion et stratégique flex zones moyenne il rock votre monde et assurez-vous que les roches ne tuent pas les genoux ! Il est également facile à zip sous et hors tension ! Matière première : 40 % chloroprène Rubber, 20 % polyuréthane, 20 % Polyester, 15 % Polyamide, 5 % élasthanne DuPont™ Kevlar® Stretch : DuPont™ Kevlar® Stretch est un tissu très résistant, léger et flexible avec étonnamment élevée à l’abrasion Fermetures à glissière YKK vous donner une qualité maximale et sans friction fonctionnalité dans toutes les conditions Créée en Allemagne, SAS-TEC propose une protection de mousse souple standard de l’industrie, construit pour durer Poids : XS, 450g Coutures FLATLOCK sont solides, flexibles et vous garder sans chafe Grip anti-dérapant garantit un ajustement parfait avec du silicone supplémentaire ou expansé relief lors des ouvertures de hem. Il conserve également votre matériel au bon endroit pour un confort maximal et de la protection Certifié indique la conformité avec la conformité stricte, qui est obligatoire pour certains produits dans l’espace économique européen