Held Kiruna, gloves

Jacket made of bovine nappa leather
Features
Antiseptic polyester mesh lining Removable CYNIX® thermo vest Ergonomically pre-curved sleeves with comfort zones made of CORDURA® stretch fabric Ventilation openings at upper arm and lower back Autolock zippers at cuffs Hip regulation 2 outside pockets 4 inside pockets (1 at thermo vest, 3 at fix lining) Shoulder and elbow protector GLADIATOR - in accordance with EN1621-1 Back protector Impact Core B-M - in accordance with EN1621-2, Level 1

Stabiler Halt und Tragekomfort. Der Nike Shape Zip Bra Women Sport-BH mit mittlerem Halt und eingearbeiteten Stabilisatoren aus weichem, schweißableitenden Material sorgt bei jedem Workout für Halt. Die Dri-FIT-Technologie sorgt für trockenen Tragekomfort. Stay cool: Bleibe kühl, auch wenn es heiß ist und Du schwitzt!Eigenschaft: Material: Body/Trägerfutter: Dri-FIT 75% Nylon / 25% Elasthan. Einsatz in der Mitte des Rückens/Futter: Dri-FIT 78% Polyester / 22% Elasthan. Polsterung oben und hinten: Dri-FIT 90% Polyester / 10% Elasthan. Polster: 100% Polyurethan Passform - Fit: Eng sitzend geschnittenGrößenflag: Fällt normal ausPflegehinweise: Maschinenwäsche, keinen Weichspüler benutzenDri-FIT Material saugt den Schweiß auf und hält trocken und frisch: Schneller Feuchtigkeitstransport nach außen. Hält den Körper angenehm trocken. Das Dri-FIT Funktionsmaterial sorgt für raschen Feuchtigkeitstransport von Deiner Haut zur Gewebeoberfläche zur Verdunstung und hält so Deinen Körper angenehm trocken  Medium Support - Stützende Passform: Für Sportarten mit mittlerer Belastung, wie Radfahren, Tanzen und Kardio-Training und auch Laufen Erstklassiger Halt: Die Schulterträger vorne verfügen über eingearbeitete Stabilisatoren, die Auf- und Abbewegungen dämpfen und sorgen für besseren Halt beim Laufen und SpringenTragekomfort: Weiches, elastisches Material am Ausschnitt, im Achselbereich und am Brustband ermöglicht eng anliegenden Tragekomfort beim Workout Bewegungsfreiheit: Ein Racerback-Design gewährleistet uneingeschränkte, bequeme Bewegungsfreiheit bei allen Aktivitäten Front-Reißverschluss mit Zip-Garage für mehr Komfort  Reißverschluss verriegelt wenn er nach unten zeigt, um ein Verrutschen des BHs beim Workout zu verhindernDoppelte Schulterträger aus Textil und Mesh-Racerback für besseren Halt und gute BelüftungWeicher Gummibund innen für hohen TragekomfortDie vorgeformten Innenkörbchen mit Mesh, bieten starken Halt und geben eine natürliche FormDas Racerback-Design ermöglicht bequeme Bewegungsfreiheit Weicher, elastischer Besatz am Ausschnitt und im AchselbereichNike Schriftzug vorne auf dem Reißverschluss eingenäht Swoosh Logo hinten aufgedruckt

The AWA L1.1 jacket is conceived for those ladies who don’t want to go unnoticed, wheter on the ski slopes or in everyday life. The next generation of AWA Ladies brings back the the layering concept but with a new look, that is more style oriented. The outer shell is made with D-DRY+, a high performance membrane capable to resist to treacherous weather conditions while the precious baby camel wool padding of the inner jacket provides great insulation to protect the wearer from coldest days. Finally, the long, slimfit cut, the cape-style hood and numerous other fine details make this new garment the hallmark of all that is feminine and elegant in the Dainese collection. Features
Water column 30.000 mm Breathability 30.000 g/m2/24hrs 2in1 shell + insulation jacket combination Fully seam sealed (outer jacket) Snow skirt YKK® AquaGuard® VISLON® water repellent front zipper Cloak Hood Trailknit neck construction Ski pass pocket
Materials
D-Dry® Plus 3 layer laminated shell (outer jacket) Baby Camelhair 100gr/m2 (inner jacket) Pertex® liner/Euphoria® external (inner jacket)
Accessories
Calf in Pertex®

Lightweight hydration pack including a 3-Litre military grade Hydrapak® Reservoir. The Hydro-3 provides tough, long lasting performance essential for the rough and tumble world of off-road riding. Incorporating Kriega’s Quadloc-lite™ system, the harness is angled away from the underarms giving total freedom of movement. An optional waist strap is included for the extra demands of riding off-road. Updated for 2017 with larger front pocket capacity plus improved hook-loops for attaching additional US-5 or US-10 Drypacks. A small side pocket allows access to smaller tools, energy bars etc. with the main compartment featuring a military grade hydration reservoir. Both are sealed with genuine YKK® water-resistant zips. The 0.4mm Thermo Polyurethane reservoir is twice as thick as standard consumer models and comes with a reinforced slider and Hydrofusion insulated big-bore tube with 45° twist-lock bite valve. Features
420D nylon rip-stop construction Hypalon™ abrasion resistant reinforcement Superspace 5mm airspace fabric Reflective panels on harness Reflective print on rear YKK® water resistant zips 3-litres (100oz) capacity

The ultimate pedal for enduro racing and riding.The mallet E was developed with the help some well known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well loved features.There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals.Available in black or blue colour options with the standard 52mm axle or half black / half blue with the longer 57mm axle.Concave pedal platform for secure foothold. Like it’s DH equivalent you get that flat pedal feel whilst running clipless.49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent.Ribbed body allows for better traction when unclippedChamfered edges for reduction in rock strikesExcellent mud-shedding: the design is very open.4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)

We'll keep excellent service and fast shipping for you.If you need a complete picture or box, please leave a message to me.