Car LED Interior Decoration Lights Floor Atmosphere Light Strip Phone App Control Colorful RGB

Do you always find it so a fiddle to put on your textile pants over your normal trousers? Do you drive a lot of commuting? Then the Swift is for you! Thanks to its smartly positioned zipper on the side, you can easily put on the pants to protect and dry at work or at home! Features
Made of Poly 600 and R-tech Fixed Raintex membrane so you always arrive dry at your destination Safe Tech protectors on the knee Side Eye boosts your visibility in the dark

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Specification:Quantity: 1pcColor: Black / GrayPlacement on vehicle: RearProduct Name: Pet Car Back Seat CoverMaterial: 600D Oxford + PP cotton + 190TSize: 170cm x 180cm / 66.93 x 70.87 (L x W)(Please let us know the Color youd like.You can leave the message on your Paypal note to tell us.)Features:-Pocket design, can put some items.-100% Brand new with good performance.-Protects your car seat from pet dander, hair, spills, oders, mud and water.-The pet seat cover is universal, easy to adjust and install according to different models.-Cover the edges of multi-layer overlapping back edge alignment to make the cushion last longer.-Waterproof 600D Oxford Cloth, grasp resistance, tear resistance, non-sticky hair, safety without hidden dangers.-When the seat cover gets dirty, the trunk cover is washable, you can clean with a damp cloth or vacuum to remove the dirty.Fitment:Suitable for cars, SUVs, etc.Package included:1 X Pet Car Back Seat CoverNote:1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.2.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)3.There are no instruction included!Professional Installation Is Highly Recommended!!If you want to know how to use or install it,please contact us by Email.We will provide help as much as possible.

Multi-dimensional functionality for life on the road. Supple sheepskin leather conforms for comfort, integrated plastic knuckle armor for those nasty encounters with the asphalt, and now a Touchtec leather palm to use your touchscreen devices without removal of the glove. Convenience, Comfort, Crash-worthiness: the Icon PURSUIT TOUCH Glove has just leveled up. Features
ToucTec™ Leather Palm Allows You To Use Your Touchscreen Device With Your Gloves On Pittards® Sheepskin Backhand For Great Fit Integrated Knuckle Armor Secure Wrist Closure Keeps The Glove In Place Expansion Gussets To Improve Overall Flexibility Colorway is Goatskin With TouchTech Palm

The first “ladies only” boots with a fashion look designed according to the specific anatomy of the female foot, with special attention to the metatarsals and heels, it guarantees a perfect fit. Full-grain leather on the upper part and elastic cordura inserts. It is completely waterproof . A pro-tech ankle shield system in the ankle area and an easy-on side closure.
Features
designed according to the specific anatomy of the female foot special attention to the metatarsals and heels full-grain leather on the upper part and elastic cordura inserts completely waterproof pro-tech ankle shield system in the ankle area easy-on side closure

Reusable Washable Dog Pets Diaper Physiological Pants