Libre
Soutien
Complete XTR level press-fit bottom bracket assembly for Shimano HollowTech II MTB cranksCups are made from fibre reinforced polymer material which reduces the risk of frame noise and damageSet includes left and right hand cups, 2.5 mm spacer, inner cover, and inner O-ringsSealed cups keep out dirt and waterMaintenance freeCompatible with 89.5 mm (with 2.5 mm spacer) and 92 mm shells42 mm cup diameterEasy press-fit installation
The ultimate pedal for enduro racing and riding.The mallet E was developed with the help some well known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well loved features.There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals.Available in black or blue colour options with the standard 52mm axle or half black / half blue with the longer 57mm axle.Concave pedal platform for secure foothold. Like it’s DH equivalent you get that flat pedal feel whilst running clipless.49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent.Ribbed body allows for better traction when unclippedChamfered edges for reduction in rock strikesExcellent mud-shedding: the design is very open.4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)
The Alpinestars Tech 8 RS continues the legacy of continuous development and improvement started in the mid-1990s, and combines premium materials and innovative design for a boot with unrivalled levels of safety and performance. A breathable inner ankle sleeve and class-leading closure system enhances comfort and fit when riding the toughest tracks, while Alpinestars dual density sole is further developed for durability and is easily replaceable.
Features
Upper constructed from a combination of full grain leather and innovative and light microfiber that is flexible and abrasion resistant. Alpinestars inner ankle sleeve is constructed from leather with 3D mesh panels and incorporates adjustable shock absorbing gel inserts on the ankles and a removable anatomic footbed for enhanced comfort, fit and protection on the ankle and lower leg. Alpinestars exclusive high grip, dual density rubber outsole includes footpeg area which is reinforced with hard polymer compound for durability and comfort. The outsole is fully replaceable. Reinforced lateral flex zone above outward facing ankle helps prevent torsion. Contoured shin plate injected with high modulus polymer for superior impact and abrasion resistance is perforated for ventilation. Contoured calf protector plate is injected with high modulus polymer for impact resistance. Extended, internal protection plates constructed from injected polymer to guard the ankle and lower foot as well as the toeâbox area. Advanced closure system features strong techno-polymer buckles for easy adjustability with a precise, secure and streamlined fit. Top and bottom reverse closure design provides superior impact security and improved fit. Low profile toe for improved control and sensitiveness in the shift area. Fullâlength, sculpted rubber panel on the inner side of the boot gives superb grip against the bike and is insulated with aluminum foil for improved heat resistance. Instep and Achilles flex zones for superior comfort, control and support. Replaceable kick starter protection insert located on the right boot. Stamped steel sole and heel guard. Soft, polymer gaiter provides effective seal around the top of the boot, preventing excessive water and dirt entry. Breathable 3D tech mesh lining reduces heat buildup and improves comfort. Contoured tempered steel shank is over injected inside the midâsole assembly for rider safety and support.
IMPACT IS EVERYTHING The Aether MIPS combines airy, open design with a revolution in rotational energy management to advance head protection for cyclists. Inside the Aether, a dual-density EPS foam liner helps to manage a wide range of impact energies, while also boasting deep internal channelling to provide cooling airflow. Our proprietary MIPS Spherical technology is integrated between the layers of EPS foam – instead of against the rider’s head – giving riders the benefits of MIPS without any obstruction to comfort or cooling power. Outside, a sleek 6-piece shell forms a stunning silhouette around the massive vents, which get added structural reinforcement via a shatter-resistant AURA reinforcing arch. The final touch is our Roc Loc 5+ Air fit system, featuring 3-way fit tuning that allows easy adjustment in seconds for the ultimate in comfort.VENTS 11 Wind Tunnel vents with internal channellingCONSTRUCTION Independent liners with spherical interface In-Mold construction with EPS liner and progressive layering Six-piece polycarbonate HardbodyFIT SYSTEM Roc Loc 5+ Air MIPSOTHER TECH AND FEATURE MIPS Spherical Technology — Independent liners with spherical interface AURA reinforcing arch Nanobead EPS foam Eyeglass grippers CoolFit anti-microbial padding
Material
Jersey Holl stretch fabric vest External polypropylene perforated and corrugated plates Inner core in Nidaplast and Crash Absorb
Performance shock
Back protector certified Cat. II - EN 1621.2/2003 lev. 1 Back protector certified Cat. II - EN 1621.2/2014 liv.1 Standard
Comfort
Airnet Imola 3D for the comfort
Temperature adjustment
External perforated pads Internal Nidaplast with perforated structure
Back protector certified Cat. II - EN 1621.2/2003 lev. 1 Directly from the racing world. On the track, the maximum riding performance is ensured only when the rider is completely concentrated without worry of injury in case of fall. Dainese® has always provided its champions with the latest state of the art in terms of safety and then transferred this technology to products for the public at large. Back protector homologation is the final step in making the same protectors used and tested by champs like Valentino Rossi available to motorcycle riders everywhere. The homologation of back protectors to EN 1621.2/2003 Standard means that they have successfully passed a maximum impact force transmissible level before sale. The Standard assesses protectors at two performance levels after receiving a series of impacts from a striking force in a predetermined area. - Level 1: limit of 24 kN per single impact, 18 kN for the average of all impacts - Level 2: limit of 12 kN per single impact, 9 kN for the average of all impacts.