These Faithfull professional, high quality Combination Spanners are forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Manufactured to DIN 3113 standards. The broached jaws and rings ensure a consistent tolerance and a guaranteed accurate fit. Both the jaw and ring end are set at a 15 degree offset for ease of use in awkward positions.Size 6mm
The BlueSpot Bungee Cordshave a heavy-duty elastic design provides constant tension and a firm hold. Offering quick, convenient load binding with non-marring high strength hooks to eliminate knots. 12mm (1/2in) diameter provides maximum holding power and is ideal for tarpaulins, cars, trucks, trailers, bikes and motorcycles.These BlueSpot Tools Bungee Cords have the following specification: Size: 60cm (24in).Quantity: 6 Piece.
E-Magnets Shallow pot magnets are low profile for applications where height is limited. They have a clearance hole through and a countersink on the magnetic face to accept a countersunk screw. Maximum operating temperature: 500°C.Material: AlnicoThe E-Magnets 827 Shallow Pot Magnet has the following specifications: Diameter: 29mm (1.1/8 inch). Height: 9mm (11/32 inch). Maximum Pull: 5kg (11 lb).
Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5
These Forgefix Plasterboard Spring toggles have an all-metal constuction, making them ideal for applications where heat resistance is required. Their wide span wings spread load, ensuring an increased holding capacity. They have excellent holding in lathe and plaster applications.The toggles are quick and easy to use, with no requirement for specialist tools. APPLICATION: Light to medium-duty fixing for all manner of fixtures including bathroom accessories, shelving, lighting, radiators and much, much more.Plasterboard Spring Toggle ZP M3 X 50mm Forge Pack 8
The Faithfull Notched mastic trowel which is specifically designed for the application of adhesive prior to the setting of tiles. The 3mm V notched blade is ideal for applying wall tile adhesive and the two straight edges for finishing and cutting off. The blade is made from carbon steel for durability and a long working life and is fitted with a full size soft-grip handle for user comfort. Blade size: 280mm x 115mm (11 x 4.1/2in).V Notches: 3mm.
