Libre
Soutien
Kurzinfo: Telegärtner - Greif-/Spannwerkzeug Gruppe Netzwerkzubehör Hersteller Telegärtner Karl Gärtner Hersteller Art. Nr. N00000A0013 Modell EAN/UPC 4018359306731 Produktbeschreibung: Telegärtner Greif-/Spannwerkzeug Produkttyp Greif-/Spannwerkzeug Ausführliche Details Allgemein Produkttyp Greif-/Spannwerkzeug
Features: Improve wireless coverage in all WLAN networks. Access to the Internet for computers located on the edge or outside of the range of your access point. Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards . Provides up to 300Mbps transmission rates. Support 2.4 GHz WLAN networks. Maximum WLAN security with WPA2, WPA and WEP (128/64). Software wizard for simple setup. 2dBi antennas integrated. Support Wireless Repeater Mode and Standard AP Mode. Provides one 10/100Mbps Auto-Negotiation Ethernet LAN ports. System requirments: WlAN access point/client according to IEEE 802.11n, g, b. 110 ~ 230-volt socket. The WLAN client must support at least the WPA encryption standard. WLAN access point and the WLAN client with automatic IP address assigment(DHCP). Forwarding of IPv4-based protocols/Address Resolution Protocol. The network name (SSID) of the WLAN access point must be set to "visible".
Modelo:CB-TP-C36HCR; Velocidad Máxima de Datos (Mbps/Gbps):5.0 Gbps; Marca:LENTION; Puerto1:USB 3.0 Tipo C; Puerto2:Tarjeta TF,Tarjeta SD,Thunderbolt,HDMI 2.0,USB 3.0,USB 2.0; Longitud del Cable:
Kurzinfo: HPE Aruba 2930M 40G 8 HPE Smart Rate PoE+ 1-slot Switch - Switch - L3 - verwaltet - 36 x 10/100/1000 (PoE+) + 4 x Kombinations-Gigabit-SFP (PoE+) + 8 x 1/2.5/5/10GBase-T (PoE+) - an Rack montierbar - PoE+ (1440 W) Gruppe Hubs & Switches Hersteller Hewlett Packard Enterprise Hersteller Art. Nr. R0M67A EAN/UPC 0190017311388 Produktbeschreibung: HPE Aruba 2930M 40G 8 HPE Smart Rate PoE+ 1-slot Switch - Switch - 36 Anschlüsse - verwaltet - an Rack montierbar Gerätetyp Switch - 36 Anschlüsse - L3 - verwaltet - stapelbar Gehäusetyp An Rack montierbar 1U Untertyp Gigabit Ethernet Ports 36 x 10/100/1000 (PoE+) + 4 x Kombinations-Gigabit-SFP (PoE+) + 8 x 1/2.5/5/10GBase-T (PoE+) Power Over Ethernet (PoE) PoE+ PoE-Budget 1440 W Leistung Latenz (1 Gbps): 3.1 µs Latenzzeit (2,5 Gbit/s): 6.5 µs Latenzzeit (5 Gbit/s): 4.2 µs Latenzzeit (10 Gbps): 3.4 µs Durchsatz: 112 Mpps Mehrfachbandbreite: 100 Gbps Switching-Kapazität: 320 Gbit/s Kapazität IPv4-Einträge in Routingtabelle: 2000 IPv6-Einträge
The USB3S2SAT3CB USB 3.0 to SATA adapter cable lets you connect a 2.5"
SATA hard drive or solid state drive to your computer through an available
USB port -- the easiest way to upgrade the hard drive in your laptop by
adding an external SSD via USB 3.0.
The cable supports UASP, allowing for transfer speeds up to 70% faster
than conventional USB 3.0, which enables you to utilize the full potential
of your SATA III SSD/HDD, when paired with a UASP-enabled host controller.
See our UASP testing results below for further details.
This portable adapter features a lightweight design with no external
power required, for easy storage in a laptop bag or carrying case. Plus,
the cable-style adapter makes it easy to swap between hard drives without
having to install your drives into an enclosure. Perfect for easy drive
access for data migration, drive cloning and data backup applications.
The USB3S2SAT3CB is backed by a StarTech.com 2-year warranty and free
lifetime technical support.
Specification
Hardware
Bus Type: USB 3.0
Chipset ID: ASMedia - ASM1153E
Compatible Drive Types: SATA
Drive Size: 2.5in
Fan(s): No
Interface: USB 3.0
Number of Drives: 1
Performance
General Specifications: Max power of the attached drive is 900 mA
Max Drive Capacity: Currently tested with up to 2TB 5900 RPM hard drives
Type and Rate: USB 3.0 - 5 Gbit/s, SATA III (6 Gbps)
UASP Support: Yes
Connector(s)
Drive Connectors: 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors: 1 - USB Type-A (9 pin) USB 3.0 Male
Software
OS Compatibility: OS independent; No software or drivers required
Kurzinfo: Fujitsu CELVIN NAS Server Q805 - NAS-Server - 16 TB - SATA 6Gb/s - HDD 4 TB x 4 - RAID 0, 1, 5, 6, 10, JBOD, 5 Hot Spare - Gigabit Ethernet - iSCSI Gruppe Netzwerkspeicher Hersteller Fujitsu Hersteller Art. Nr. S26341-F105-L814 EAN/UPC Produktbeschreibung: Fujitsu CELVIN NAS Server Q805 - NAS-Server - 16 TB Gerätetyp NAS-Server Host-Konnektivität Gigabit Ethernet Gesamtspeicherkapazität 16 TB Max. unterstützte Kapazität 24 TB Anzahl installierter Peripheriegeräte/Module 4 (installiert) / 4 (Max) Abmessungen (Breite x Tiefe x Höhe) 18 cm x 23.5 cm x 17.7 cm Gewicht 3.65 kg Prozessor 1 x Intel Celeron J1900 1.99 GHz Massenspeicher-Controller RAID - SATA 6Gb/s - RAID 0, 1, 5, 6, 10, JBOD, 5 Hot Spare Festplatte 4 x 4 TB Netzwerk 10Mb LAN, 100Mb LAN, GigE Stromversorgung Wechselstrom 120/230 V (50/60 Hz) Speicherbetriebssystem Linux Kernel 2.6 Systemanforderungen UNIX, Linux, Apple MacOS X, Microsoft Windows Server 2003, Microsoft Windows Server 2008 R2, Microsoft Windows Server 2012,
