Abus E60NP Nickle Pearl Z40/K40 C Thumbturn Cylinder

The Forge Padlock Bolts or Brenton Bolts are used to secure gates, or doors which require locking with a padlock. The Forge padlock bolt is designed for heavy-duty use with a strong steel bolt and locking collar. It comes in a variety of sizes and are either black powder coated or galvanised. Supplied with fixings for screwing into position and also bolt through fixings for additional security. Fitting Instructions: 1. Position Padlock bolt in the desired position and mark the square fixing holes with a pencil. 2. Drill holes using a Ø6mm drillbit and use the bolts provided to fasten in place. 3. Position the keep and ensure that the bolt moves freely through the hole.The FGEPBLTGAL6 Padlock Bolt has the following specifications: Bolt Length: 150mm.Finish: Galvanised.

Colron Ring Remover is an easy to apply mousse that removes old and new ring stains.

The Stanley FatMax fine cut handsaws have a bi-material handle screwed and ultrasonically welded for comfort and security. The teeth are precision set to generate clearance of kerf for the blade to cut on both the forward and back stroke, increasing cutting efficiency by 30%. These 3 sided teeth are precision ground to offer razor sharp cutting edges at every stage of the stroke. They are induction hardened to stay sharper for longer. Fine cut blade 11 tpi.Length 500mm (20 tpi)

Hammer fixings are for fast fixing with minimal screwdriver work. Quicker to use than standard plugs. For fixing stud battens to walls before cladding. Although hammered in, they can be un-screwed.Size. 5 x 50mm. Card of 10.Fixture Thickness 25mm.

The Bulldog Square Punner (tamper) has a one piece head design and a large, square, solid-cast head. The handle is made from tubular steel. It is ideal for finishing work on asphalt surface, to tamp up close to walls and corners where mechanical rollers leave ridges or cannot get access. Part of Bulldog's Premier Agricultural Tool range, manufactured to the highest possible specification to guarantee quality. Made In Britain.

The RIDGID Strap Wrenches are best for any polished pipe. They have a sturdy, cast-iron housing with an I-beam handle and a strong, woven nylon strap that gives a tight grip. Two models available with special strap for plastic pipe.RIDGID No.2 Strap Wrench Handle Length: 300mm (11.3/4in).Strap Length: 760mm (30in).Strap Width: 30mm (1.1/8in).Rated Pipe Capacity: 50mm (2in).Actual O.D. Capacity: 135mm (5.1/2in).Weight: 0.8kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that strap can accommodate.