Everbuild Jetcem Rapid Set Cement 3kg

The DEWALT DCK654P3T XR Compact TSTAK­ Kit, contains the following: 1 x 18 Volt DCD796 XR Brushless Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Max Torque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm.Weight: 1.3kg. 1 x 18 Volt DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18 Volt DCS355 XR Cordless Oscillating Multi-Tool delivers up to 57 percent more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mm.Weight: 1.06kg. 1 x 18 Volt 125mm DCG412 XR Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 18 Volt 165mm DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change. No Load Speed: 3,700/min.Max Cutting Depth: 90 degree : 55mm, 45 degree : 42.1mm.Blade: 165 x 20mm Bore.Weight: 3.8kg. 1 x 18 Volt DCH273 Brushless XR 3 Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm.Impact Energy: 2.1 Joules.Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mmWeight: 3.1kg.

Lockfast Woodstock drain, chimney and flue brush, has a wooden stock, brass joint and polypropylene bristles. For brick chimneys and coal burning applications, and drain cleaning purposes.Size 200mm (8 in).

Roughneck Ball Pein Hammer manufactured from hardened and tempered drop forged alloy steel and with a fully polished head, epoxy bonded for added strength. It has a solid core fibreglass handle with polypropylene jacket. Unique treble injected TPR ergonomically designed soft grip handle for comfort during use and for reducing fatigue.Weight: 450g (1 lb).

The DMT D9 Diamond sharpening bench whetstone has non-slip feet and will not break, chip, crack, hollow or groove. The D6 whetstone is made from the hardest material which is one of the most efficient sharpening abrasive. Available in unique interrupted surface and continuous surface, light pressure produces a sharp edge with just a few strokes. Use water for lubrication no oil, smell or mess and can hone ALL hard materials: carbide, steel, etc. and is supplied with Non-skid mat. Precision, continuous monocrystalline diamond bench whetstones with rubber feet. The grit size is etched into the side of the whetstone. The grits are denoted by a dual coloured circle which is set into one end. Blue: Coarse Grade 325, 45 micron.Red: Fine Grade 600, 25 micron.Green: Extra Fine Grade 1200, 9 micron.Red: Fine 600g, 25 micron

These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a ‘Fully Threaded Cup Square Hex Bolt’, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Carriage Bolt & Nut ZP M10 x 50 Bag 10

The RB40VA has a high efficiency fan for increased output air volume, a variable speed 550 watt motor, external brush caps for rapid checking and replacement and soft-grip wrap around handle for comfort and ease of use. Supplied with a dust bag and nozzle.