8Pcs / Set ABS Chrome 4 Car Door Handle Covers With Keyless For Mazda 2/3/6 CX-3 CX-5

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Features
Thermoplastic Externall shell Removable and washable liner Removable and washable cheek pads Santitized hygienic treatment for inner fabrics Helmet interior anatomically designed Painted and UV-coated outer shell Lower protection rubber Adjustable peak Ventilation system Air extractors Micrometic retention system 1350gr

Material
goatskin palm back of hand in Nyspan with leather coating
Lining
pique push-pull lining
Membrane
GORE-TEX® membrane
Comfort
visor wiper elasticated panels on back and fingers special leather at thumb and finger which allows smartphone operation velcro adjustment at wrists velcro adjustment at cuffs + Gore Grip technology
Safety
certified under norm EN 13594:2015 "protected glove for motorcyclists" TEMPERFOAM® knuckle protection special foam knuckle & finger protection reinforced edge of hand Teramid® protection at ball of thumb 3M SCOTCHLITE™ reflectors

Features
Versatile 2 in 1 trousers Adjustable zipped ventilation Removable lining warm and waterproof at once Large zipped vents on thighs Removable lining warm and waterproof at once with breathable Drymesh 5/5 membrane adjoined Adjustable belt on sides Double strap tightening system on bottom leg 2 external patched pockets. 2 external hand pockets Connection with jackets thanks to zip 270° Reflective elements approved hip and knee protectors according to the standard 1621-1 PPE certified

Pleat PU Leather Zip Up Jacket

500 D Polyester Gewebe herausnehmbare Reissa®-Membrane: 100 % wasserdicht, 100 % winddicht, atmungsaktiv herausnehmbares Thermofutter YF-Protektoren zertifiziert nach EN 1621-1 an den Schultern und Ellbogen herausnehmbarer Schuam im Rücken SAS-TEC® SCL-19 Rückenprotektor zertifiziert nach EN 1621-2 nachrüstbar reflektierendes 3M Scotchlite ™-Material AirVent-Belüftungsreißverschlüsse 3 Außentaschen 2 wasserdichte Innentasche Verbindungsreißverschluss Sicherheitsnähte