Spidi Armor Evo, textile jacket women

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Specifications:Product: Baby in Car DecalSize: 9.8X7cmThickness: 1mmColor: Yellow, Blue, RedWeight: 6gPackage Included:1 X Car Sticker

General Features
Micrometrically adjustable strap retention system
Visor
Integrated non-scratch ISV-5-1 sun visor (sizes XS-S) and ISV-5-2 (sizes M-L-XL) City 18-1 non-scratch visor 1 (sizes XS-S) and City 18-2 (sizes M-L-XL). It covers and protects the face to below the level of the chin New SUN VISOR CONTROL mechanism for operating sun visor. The visor is operated by turning the plate on the left side of the helmet.
Exterior and interior shell
HIR-TH (High Resistance Thermoplastic Resin) outer shell Inner shell in EPS in 4 sizes, shell and EPS dimensions optimised using the FEM (Finite Elements Analysis) system 2 external shell sizes Inner EPS in two sizes with different densities
Interiors
Fully removable and washable Dry Comfort inner liners
Ventialtion
Central air vents integrated into the shell profile for optimal ventilation
Functionality
Removable neck roll

Twist is an MX helmet made in Airoh’s high resistant thermoplastics (HRT) and expressly designed for the most demanding riders. Its outer shell has an ultra light weight and an aggressive look and is a perfect choice for the most demanding riders to excel in the toughest races. Its lining is highly breathable, removable and washable and provides absolute comfort. Twist also has an adjustable peak and a dust filter (as an added plus for off-road rides). A double D-ring retention system ensures maximum comfort and protection even in the most risky situations. Features
Thermoplastic HRT 1180gr +- 50gr 1 shell size Front vent Chin guard vent Rear vent Removable and washable inner lining (Hypoallergenic) Doppel D-Ring Adjustable peak

Specification:-Quantity: 1pc-Color: Black-Material: Polyester-To Fit: Rear Window/Side Window-Size: 102cm x 55cm (extensible size)Features:To prevent car agingApplies to all models!100% Brand new and high qualityFree to lift the window, Good ventilatingReceive a convenient does not occupy a space,foldableReduce the temperature inside the car, Effectively protect the interiorThe sun the mosquito net cloth, Shading of the mosquito again at the same timeNote:1. Please check the size measurement chart carefully before making payment.2. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cmPackage Included:1 x Car Window Sun Shade

Specification:Item model: Sanvi V6 bi led projector lensItem dimension: 2.5 inchesItem power 35wItem voltage :9-12vColor temperature: 5500KWork Temperature: -45℃-85℃Driving model: RHDLHDFitment: H4 H7 9005 9006 mounting baseLifespan:30000hrsWarranty:12monthsDrive: External driveFeartures:Light source: adopt 6pieces LED Chips, instant light up. No delay. Output 35w 5500 4660lux cold white beam.Cooling module:The cooling module is consists of turbo cooling fan,aluminum heat sink and driver.Turbo cooling fan RPM8000, it will make sure the headlight work under lower temperature.LED Driver function: the driver also can take away part of heat, it also can prevent the chips burn because of high voltage.RHD and LHD version: there are RHD version and LHD version.RHD version is suitable for yor the car steering wheel on the right side (right hand driving).LHD version is suitable for the car steering wheel on the left side (left hand driving)Fitment : the lens will come with h4 h7 9005 9006 mounting accessories.If it can replace h4 h7 9005 9006 original headlight bulbNon-destructive Installation: This headlight is with removable bracketand h4 h7 9005 9006 mounting accessories.It can replace h4 h7 9005 9006 original headlight bulb,It also can replace original Bi-xenon projector lens.No need to cut reflectorsPackage Inclued:1 X Pair Headlights