The Roughneck Bonsai Claw Bar is manufactured from drop forged alloy steel that has been hardened and tempered. With a painted finish and polished tips. Its low profile claw design means it can easily fit into small spaces. There is also a nail removing head and a heel that can be struck with a hammer.
Masajeador muscular eléctrico de 12 V Percusión portátil Vibrante Pistolas de masaje potentes Masajeador muscular de tejido profundo de mano para cuello Espalda Hombros Pie pierna
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/2 in Shank.Angle A = 90° D = 12.7 mmC = 25 mm
Stahlwille Combination Spanners Imperial AF 10 Piece Set are made from chrome alloy steel, chrome plated. Contents: 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 and 3/4 AF. Stahlwille set of 10 Combination Spanners. AF imperial, with 15° offset ring end. The spanners are drop forged from high-grade special steels and chrome plated. They have been optimally hardened in continuous furnaces with no scale build-up or skin decarburisation and gently quenched in oil. The spanners are extremeley strong yet lightweight due to Stahlwille's 'double-T profile'. Stahlwille's unique plating method prevents the problem of chrome flaking. The ring end of the combination spanners are equipped with an Anti-Slip Drive profile. This permits high transmission of forces to the flats of the nuts and bolts without damaging them. This 10 piece set contains the following sizes: 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 and 3/4in AF. MADE IN GERMANY.
A hexagonal bodied Rivet Snap with the working end heat-treated to ensure a long life.This tool is used for the forming of heads on solid rivets.Size 5 x 125mm (3/16 x 5 in)
Manguera de agua expandible para jardín Mangueras de plástico flexible Tubería Lavado de autos Riego de flores Limpieza del hogar Tubería de agua de 1.5M con junta giratoria de 360 ° / Tubería de agua de 1.5M con gancho de almacenamiento de manguera (opcional)
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.
