1.5cm*5M Clear Car Door Edge Guard Anti-Scratch Protective Film Anti-Scratch Sticker

Feature:1. The FM Transmitter has a battery voltage detection function.2. Support bluetooth hands-free calls, built-in microphone, safe answer the phone.3. support for mobile A2DP function, even after playing bluetooth high quality mobile phone music.4. Power automatically back to the boot, automatically enter the pairing state.5. Support U disk expansion play MP3 / WMA format music.6. Comes with USB charger, output 2.1A, can charge for mobile terminal equipment.7. HD display, you can clearly show the FM frequency, song name, player status, connection status.8. Two charging ports, the output 12-24V, supplying power for your electronic equipments.Specification:Model: ER9Color: BlackRated working voltage: 12V-24VLimit working voltage: 9V~26VDual USB Output: 5V/2.1AWorking Current: 45mA(Max.)Consumption rate: 1WOperating temperature: 0 ~ 50 degreesSupport playback format: MP3/WMASignal to noise ratio: 60dBDistortion: 0.1%Frequency response: 20Hz-15KhzLeft and right channel separation: 60dBbluetooth version: 4.2bluetooth transmission distance: 10MMicrophone effective distance: 0.5-2MWorking Temperature: -10℃-70℃FM transmitter frequency: 87.5MHZ --- 108.00MHZSensitity: -92dBmSize: 95*73*50mmWeight: 86gPackage Included:1 X Wireless bluetooth Car FM Transmitter1 X Mini bluetooth Earphone1 X User Manual

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

The revolutionized Tech 7 MX boot incorporates innovative materials and technology in a completely new design for a lighter, more anatomically profiled performer. This CE certified boot promotes core stability and flex via a biomechanical pivot while offering excellent ankle protection. The boot chassis has been designed to give complete feel and optimized interaction with bike controls, while the innovative buckle system allows easy, precise closure. Features
Boot chassis designed with an ergonomically profiled forefoot and lower toebox to provide easier shifting and improved rear brake feel and control. Incorporating an innovative one-piece injected dual compound foot shell with coinjected hard toe protector and integrated steel shank. The shell is highly resistant to abrasion and impact, adds to the boot’s overall durability and improves boot’s streamlining. New dual compound sole is seamlessly integrated into the base structure for superior durability, high performing rubber grip patterning, and feel. The sole and footpeg insert are replaceable. Upper constructed from innovative microfiber material that is flexible and abrasion resistant. Upper material is reinforced with PU for high levels of water-resistance and durability and improved weight-saving performance. Material ensures consistent fit even for long term usage and is easy to maintain and clean. Contoured calf protector plate is injected with high modulus polymer for impact resistance and incorporates Alpinestars’ developed blade flex systemfor greater precision control and movement, added protection for heel and Achilles tendon and helps prevent hyperflexion. New TPU ankle protection system incorporating a biomechanical link between the middle and bottom sections of the boot helping prevent damage to the leg by providing progressive force relief for torsional forces. Alpinestars developed TPU shin plate and medial protection are constructed from one single part for greater structural integrity and stability. The anatomically profiled shin plate features a dual closure system with an internal microfiber flap attached with Velcro® for a precise fit closure while the rugged and durable shin plate attached securely with a precision adjustable buckle. The TPU medial side panel incorporates an advanced honeycomb rubber insert and is designed for excellent grip against the bike while guarding against impact. Wide entry aperture for convenience and allows broad ranging calf fit adjustment and support. Innovative buckle closure system includes high-impact aluminium bridge closures, with memory settings and a quick release/locking system with self-aligning design for easy, precise closure and improved riding performance. All buckles are replaceable. Redesigned instep and Achilles accordion flex zones construction for superior comfort, control and support. Extended microfiber gaiter helps prevent excessive water and dirt entry. Internal lining includes anti-slide microfiber suede on the heel to help keep foot in position. Soft foam reinforcement on ankles and collar for long lasting comfort and shock absorption. New, dual compound, removable anatomic footbed includes EVA and Lycra top for comfort and support ensures even weight distribution and reinforced heel.

Specification:Product Name: HandlebarColor: Chrome, BlackMaterial: IronWhole Length: 660mmInside Diameter: 17.5mmOutside Diameter: 22mmFitment: Universal For Harley/Honda/Yamaha/Suzuki/Kawasaki/Triumph Most ChopperCruisers Bobber Bike or any custom applications.Note:1. (The compatibility is just for reference. Please compare the part No.with your original one before purchasing!)2. Please check the size measurement chart carefully before making payment.3. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)4. The color of the actual items may slightly different from the listing imagesdue to different computer screen, thanks for your understanding.Package Included:1 X Handlebar

Features Shell
ECE 22.05 GR 1700 ± 50 KPA 2 Shells Long, Oval
Visor
Twin Shield System Easy to Exctract the visor Scratch Resistant UV Resistant Fog Resistant Air Diffuser Anti Fog System
Comfort
Liner Hyper Vent Removable and Washable Chin Curtain Breathable Hypoallergenic Laser-Cut Foam Ready for LRP 3 Bluetooth
Security
Steel Quick Release Buckle Reinforced Chin Strap Reflective Safety Patch Multi-Density EPS Neck Roll
Ventilation
Channeled Ports 2 Step Front Vent Top Vents Exhaust Port
KPA A proprietary blend of polycarbonate, space age thermoplastics and additional materials specifically formulated by LS2, KPA (Kinetic Polymer Alloy) Offers ultra-light weight and high penetration resistance, but with some flexibility for the ultimate in energy dispersion. This special formula meets both ECE 22.05 and DOT requirements. Twin Shield System LS2 s drop-down sun shield helps protect the rider s eyes from bright sun, and moves up and out of the way quickly and easily when entering dark tunnels, offering a more comfortable riding experience. Reflective Safety Patch To increase rider safety at night or in low visibility conditions the neck roll has a reflective safety patch that glows in the light of other vehicle s headlights.

* forehead and chin ventilation * clear, scratch resistant quick change visor * Pinlock® prepared | Article: IXS 300 1.0 Helmet, white, Size S | Article: IXS 300 1.0 Helmet, white, Size S, white, Size S