Bering Renegade, textile jacket

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Specification:MaterialPU LeatherFillerCottonColorBlack,Coffee, Orange, Beige, Wine RedApplicationUniversal for Cars,Home and OfficePositionFront Seat and Back SeatFeature:1. Beautiful and have good quality.2. Use green cloth, keep the car space air fresh.3. Bottom cover design, not easy to move away, protecting your seat from damage.4. Easy to install.Package Included:1 X Rear seat cover2 X Front seat coverSome Accessories

* The outer shell in injection-molded Thermoplastic reinforced resin * The wide opening of the visual field allows a safer and more performing ride * The window allows to house all the last generation goggles | Article: Suomy X-Wing Duel Motocross Helmet, black-yellow, Size XS | Article: Suomy X-Wing Duel Motocross Helmet, black-yellow, Size XS, black-yellow, Size XS

Protection
Connecting zip SuperFabric® protection at crash zones EN 1621-2 approved SAS-TEC® back protector rib protector pocket for optional Velcro for optional 2 pcs chest protector exclusive EN 1621-1 approved Held cloverleaf SAS-TEC® shoulder & elbow protectors 3M Scotchlite™ reflectors
Fit/features
soft collar optional Held camel bag optional Held light system hip adjustment height adjustable waist adjustment height adjustable arm adjustment Held Clip-in Technology internal cellphone pocket front air-vent zipper (Held ACS) dual arm adjustment map / document pocket air-vent zippers in front, back & arms 2 external pockets 1 back pocket 1 inner pocket
Membrane
GORE-TEX® Pro
Lining
COOLMAX® breathable mesh inner lining 3D air mesh panels in back to promote air circulation
Outer shell
Schoeller®Keprotec stretch Gore-Tex® Pro 500 D Armarcor reinforcements on critical areas

2X 13 LED Universal Motorcycle Motorbike Turn Signal Indicators Light Lamp AmberDescriptionMaterial: PlasticCase Color: BlackLens Color: AmberLED Color: AmberQuantity: 2 pcsLEDs per Light: 13 LEDsVolt: 12V DCUsage: Turn Signal /Indicators LightsCompatibility: UniversalDimension:Like the picture showConnection: 2 wiresWire length: 24cmFitment:Universal fit all the motorcyclePackage includes:2 x Motorcycle Turn Signal Lights

AC 1- 5V 2 Pins Passive Electronic Piezoelectric Piezo BuzzerDescription:Plastic housingConvenient for connectingThey have good characters like small cubage, low wastage and high voice pressure.Specification:Working Voltage: AC 1-5VBody Size(pin not included):14 x 7mm/0.55 x 0.28(approx)Pin Pitch:8mm/0.3(approx)External Material:PlasticColor:BlackFunction:It is applied to a variety of electrical products of alarm and voicePackage Included:1 X Passive Piezo Buzzer