RIDEX Rotule de direction PEUGEOT,TOYOTA,CITROËN 914T0470 1610936180,381764,1610936180 Rotule de barre de connexion 381764,4504609295

Côté d'assemblage: droit; Correspond à la pièce originale dans sa couleur: noir; Année à partir de: 12/2013; Année jusqu'à: 02/2018; MINI: Schrägheck (F56),Schrägheck (F55),Clubman (F54),Cabrio (F57)

1Pc Car Removal Tool Car Fastener Plastic Trim Removal Clips

FLOVEME 2 en 1 Girar Soporte del teléfono Reposacabezas Reposacabezas Gancho

Features: Its work is characterized by side refrigeration and side fever. Hot and cold on both sides of the temperature difference of 68 degrees. Cooling piece is very simple to install and use. Each device is full inspected and tested. Fitted with 6-inch insulated leads. These devices must be used in conjunction with a heat sink to avoid burned.

Features: Front and rear dual lens, supports parking monitor. Full HD 4.0 high definition LCD screen. Recording mode and photo mode to select. Loop recording: Seamless continuous recording automatically overwrites oldest footage with newest, ensure the efficient use of storage. Built-in G-sensor, lock the recordings while emergency happens.

ar Water Temperature Gauge 2 Inch for 12 Volt System Universal Condtion: Air-core meter moverment. Suitable for 12 volt systems. Mounting directly in 2 inch hole. Scale from 100F to 250 F,40 ℃ to 120 ℃. 2 inch water temperature gauge with backlight. Come with black metal panel and 'U" bracket for add-on or replacement purpose. It can alert you that higher or lower than normal water temperature reading,to protect your driving safe. How to Connect: Red wire lead for + volt supply to internal lamp Black wire to system ground S Threaded terminal for connecting sensor wire + Threaded terminal for connecting + volt supply  - Threaded terminal for connecting system ground Pls remember that the sensor is automatically connected to system ground when installed. If installing where the body of the sensor is not tied to system ground, it will be necessary to hook up a ground to the body of the sensor element. Note: Hole diameter is 2 inch. Meter OD is 2 3/16 inch. Meter depth from front of panel to the end of the mounting studs is 2 inch. All you will need is 18 gauge stranded wire to make the necessary connections. Package Included: 1 X Water Temperature Gauge 1 X Sensor 1 X Manual