coloré tie dye housse de couette ensemble boho hippie ensemble de literie arc-en-ciel cravate teint couette couverture reine 3 pièces pour enfants adolescents adultes 1 miniinthebox

A pack of two Forge traditional Spring Door Stops for wall mounting at low level. Supplied with fittings and fitting instructions.Fitting Instructions:1.Remove fixing plate from spring and screw to skirting at desired position.2. Place spring back against base and turn clockwise so that the spring is rethreaded into the base. N.B. Additional fixings may be required for fitting to solid or hollow walls.The FGEDSSPRICH Door Stops have a long lasting chrome finish, with a rubber cap to prevent marking and damage to the door surface.

The Bahco P51H-SL Professional Hedge Shears are for professional use in parks, topiary gardens and nurseries. They have fully hardened blades with a partly serrated edge. The extra long, lightweight aluminium handles offer a good reach and reduced fatigue is provided through superior cutting performance and very comfortable handling. Length: 730mm.Capacity: 10mm. Weight: 1.76kg.

Vintage Business PU Clutch Bag 8 Card Holders Phone Bag Purse For Men

This is a 3 meter roll of universal weatherstripping. 5mm thick, 15mm wide, 3m long. Ideal for indoor or outdoor use. Do not need messy glue or contact adhesive, just peel off the backing and install. Can be used on your doors, trunk, roof rail, sunroof, camper top or any place you need to seal.

Kitchen Foldable Chopping Block Non-slip Folding Cutting Board Portable Camping Outdoor Chopping Board Cooking Mat Tool

The Forge range of Gable Handles incorporates a traditional backplate style with a scroll handle. The sprung handles have a lasting finish. They are ideal for internal or external use as the handles have been tested for corrosion resistance and cycle tested beyond 100,000 uses. Supplied with screws and fitting instructions. Product Dimensions:Backplate: 170 x 42mm.Handle: 55 x 93mm. Fitting Instructions:1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.2. Drill Ø2mm pilot holes and reposition the handle before securing using the wood screws provided.3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.Designed to be used with any tubular mortice latch.Finish: Chrome.