The SCOTT 350 Kids helmets combines high end materials with cutting edge construction. Without having to compromise junior riders can have a helmet that looks good, feels good, and protects their head. Features Injection molded ABS shell Removable, Washable, liner and cheek pads Highly integrated intake and exhaust vents Easy adjust visor
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric. Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor. The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part. Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. Removeable Nose Protector Ventilation The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation. Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Angenehmes Fleece-Futter an der BundInnenseite Stretch-Einsätze für absolute Bewegungsfreiheit Optimale Temperaturregulierung dank Belüftungssystem Robuste Dreifach-Steppnähte SAS-TEC Protektoren an den Knien. Tasche für optionalen Hüftprotektor Hybrid Ellbogenprotektor-Tasche für zwei Größeneinstellungen Wachsbeschichtung für noch mehr Strapazierfähigkeit Zweilagiger Stoff für noch mehr Strapazierfähigkeit am Saum Reflektierende Elemente für perfekte Sichtbarkeit Anti-Rutsch-Einsatz im unteren Bereich 76cm-Verbindungsreißverschluss 2 Außentaschen 1 Cargotasche Extra robustes, farbiges YKK FlexFix® avant Druckknopfsystem Verschluss mit Druckknopf und Haken Verstellbarer Bund und Saum
Specifications:for VW CD Machine Model: RCD510+310USB Switch Socket Size: about 2.3x2.3x3.9cm (0.90x0.90x1.53)Cable Length:about 96cm (37.79)Switch Socket Model: 5KD.035.726.AFit Model:for VW - PASSATforVW - GOLF MK5forVW - GOLF GTI MK5 MK6Note:Please check the CD machine model before buying. If you are unsure whether it can apply to your car, please contact us first time. Thanks.Package Included:1 x USB Switch Socket1 x CableNotice:-Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.-Please allow 1-3CM differs due to manual measurement.-Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
Kuh und Känguru-Leder Leder-Perforationen im Frontbereich, den Armen und den Beinen Zweilagig an den äußeren Oberschenkeln und am Gesäß Außenprotektoren an Ellbogen, Schulter und Knien. Stretch mit Faser-Verstärkung im hinteren Schulterbereich und Lendenwirbelbereich Vorgeformter Brustbereich, Beine, Schulter und Ärmel. Herausnehmbares Polyesterfutter mit hochdichtem, stoßdämpfendem Schaumstoff Hochfeste Nähte. Ausgestattet mit Slidern
Die Concept VTD Jacke ist die Basis des neuen Modular-Systems und steht für Vielseitigkeit schlechthin. In Kombination mit den anderen Produkte der Modular-Reihe passt sich dieses Allroundtalent problemlos an alle Witterungsbedingungen an. In der praktischen Tasche am Rücken hat die DP Concept oder die Insuloft Jacke Platz, damit du für alles gewappnet bist.Bequemer Kragen mit weicher Einfassung Automatisch schließender Kragen mit Magnetveschluss, mit zweiseitigem YKK FlexFix® avant Druckknopfsystem, sodass der Kragen für die gewünschte Belüftung offen oder geschlossen getragen werden kann. Belüftungssystem mit praktischem magnetischem Verschlusssystem Temperaturkontrolle, Dank Belüftungssystem an Brust, Rücken und Ärmeln Robuste Dreifach-Steppnähte SAS-TEC Protektoren an Schultern und Ellbogen. Tasche für optionalen Rückenprotektor mit Größenhinweis Die Protektoren werden für optimalen Halt am Obermaterial befestigt Hybrid Ellbogenprotektor-Tasche für zwei Größeneinstellungen Wachsbeschichtung für noch mehr Strapazierfähigkeit Reflektierende Elemente für perfekte Sichtbarkeit 76cm-Verbindungsreißverschluss 2 Innentaschen 4 Außentaschen 1 Rückentasche Easy-fix Reißverschlusssystem an der Brusttasche Verstellsystem an Saum, Ärmeln und Bund
