Sandberg Multi - Netzteil - Pkw - 3 Ausgangsstecker (440-79)

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Article complémentaire / Info complémentaire 2: avec support en caoutchouc; Matériel: Aluminium; Côté d'assemblage: inférieur, Essieu avant gauche; Type de bras oscillant: barre oscillant transversal; OPEL: VECTRA C GTS,VECTRA C,SIGNUM,VECTRA C Ranchera familiar; FIAT: CROMA 194; SAAB: 9-3 YS3F,9-3 Ranchera familiar YS3F,9-3 Descapotable YS3F,9-3X; VAUXHALL: VECTRA Mk II C GTS,VECTRA Mk II C Ranchera familiar,VECTRA Mk II C,SIGNUM; 352051, 12796013; Bras De Suspension,Triangle De Direction,Bras de liaison, suspension de roue

perfekt für die Nutzung des Tablet-PCs auf der Rücksitzbank im Kfz: zum Film schauen, zum Arbeiten, zum Spielen für Tablet-PCs von 17,80cm (7"") - 25,40cm (10"") verstellbare Krallen für eine individuelle Anpassung und perfekte Fixierung des Tablets neigbar, schwenkbar und 360° drehbar für eine optimale Positionierung Schraubmontage an der Kopfstütze im Fahrzeug passend für alle gängigen Kopfstützendurchmesser bis ca. 14 mm hochwertige, stabile Alu-Halterung im schicken Design Hauptmerkmale Design Handy-Gerätetyp Tablet/UMPC Typ Aktiv Vorgesehene Verwendung Auto Produktfarbe Schwarz, Silber Multimedia Eingebaute Lautsprecher Nicht Systemanforderung Maximaler Bildschirmdurchmesser 25,4 cm (10"" ) Energie Energiequelle Nicht unterstützt Technische Details Drehwinkel 360°

Outer garment
Fibretech 300D Waterproof fabric
Isolation
Polyamide comfory lining
Protection
Reflective material
Comfort
Double-slider side zips Lower legs adjustments Elastic waist fasteners Belt loops

Features
Dual-purposed Top vent: Intake and Exhaust of the top vent operates simultaneously for maximum air circulation Integrated Sunshield: Anti-fog coated smoke tinted sunshield deploys quickly and easily by bottom positioned new operation system RapidFire™ Shield Replacement System: Simple and secure shield ratchet system provides ultra-quick, tool-less removal and installation for efficient operation Emergency kit (Cheek Pads) for safe and quick rescue in emergency situation Multicool interior with advanced anti-bacteria fabric provides enhanced moisture wicking and quick drying function than previous generation Crown and cheek pads are removable and washable Rear vent switch for easy control of air flow Anti-fog lens prepared shield and includes Anti-fog insert lens Eye glasses and sun glasses friendly EPS design Premium Integrated Matrix / P.I.M. Plus: Reinforcement materials, including Carbon and Carbon-Glass Hybrid fabric, provide enhanced Shock-Resistant performance, more comfort, and lightness of helmet This helmet comes standard with a clear visor.

Double spoiler with incorporated air extractors: optimization of the aerodynamic trail and internal cooling. Autoseal system: flattens the visor onto the helmet, offers better soundproofing and seals the helmet (against water and cold). SHARK skin peak side fastenings: passive reduction of aerodynamic noise. Micro-tech interior with antibacterial properties under the AEGIS label. Features
Constructed from carbon aramid fibre Integrated UV380 label & anti-scratch sun visor Double D-ring strap Visor can be fitted with a Pinlock Max Vision® film insert 2 shell sizes : optimal morphological adjustment Optimal comfort for the persons wearing glasses Quick release visor system Removable and washable cheek pads and lining (Use the delicates or cold cycle and place inside a washing net) Planned location for SHARKTOOTH® AEGIS-lining