Libre
Soutien
Jamara Tiger. Typ: Monstertruck, Motortyp: Elektromotor, Maßstab: 1:10. Gewicht: 2,2 kg, Länge: 44,5 cm, Breite: 335 mm. Batterietechnologie: Nickel-Metallhydrid (NiMH), Batteriekapazität: 5000 mAh, Batteriespannung: 7,4 V
This Honda RC213V Repsol Team (Daniel Pedrosa - Moto GP 2014) Diecast Model Motorcycle is Orange and features working stand, steering, wheels. It is made by Minichamps and is 1:12 scale (approx. 18cm / 7.1in long).
Flytec SL-156A 1/18 2.4G 4WD 16 KM / h Rock Crawler RC Buggy Car
Original WLtoys 184012 2.4GHz 4WD 1/18 45KM / H Brossé Électrique RTR F1 Racing RC Voiture
This Ducati 1199 Panigale Diecast Model Motorcycle is Red and features working side stand, steering, wheels. It is made by Maisto and is 1:18 scale (approx. 11cm / 4.3in long).
Features: With electronic compass and barometer. SP Racing F3 Flight Control With Integrated OSD for Multicopter. The SPR F3 builds on tried and tested software, processor and sensor technology to make your aircraft fly like it's on rails. ST debug port on the back of the board have(SWD) and startup mode selection, not deadlock bootloader. There MEGA328 ISP port on the back of the board, will not deadlock bootloader. Looptime up to about 2 times the previous generation based stm32F1 flight control. Use all the features all the time. Connect your OSD + Smartport + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time. The SP F3 runs Cleanflight which can be configured to suit your needs using a cross-platform GUI(Windows/OSX/Linux). Tiny and lightweight. On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork. STM32 F3 support next-generation processor attitude efficient hardware floating-point operations, and faster ARM Cortex M4 core computing. All using 2.54 interface. PDB can be more perfect combination. Full support for OneShot ESCs for easy PID tuning and a sharper response. Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in). Dedicated output for programmable LEDs - great for orientation, racing and night flying. Battery monitoring ports for voltage and current. Sonar support for precision low-altitude hold. I2C port always powered, perfect for external sensors or always-on OLED screen. Buzzer port for audible warnings and notification. F3 + OSD run the company to modify the optimization of cleanflight flight control software(FC).