20/pack M5 Stainless Steel Hex Nut Screw Cap

The Forge Tubular Mortice Latch for internal doors can be used with any lever latch handle, lever on rose handle or door knob. Supplied with screws and fitting instructions.Fitting Instructions:1. Mark a height line on door face and edge as well as a centre line on door edge.2. Drill a Ø23mm hole into door edge to accept the latch body, and a Ø19mm hole in door face for the spindle bar measuring from the door edge (43mm for 65mm latch, 60mm for 80mm latch).3. Fit latch and use a pencil to mark around the faceplate. Chisel out so the faceplate lies flush with door edge.4. Transfer the height line onto the door frame and mark a vertical line at half the door thickness from the door stop.5. Drill a Ø16mm hole, 10mm deep at this point and square out with a chisel. Position the striking plate over this hole, mark around with a pencil and chisel out to lie flush.Case size: 65mm (2.5 inch). Backset size: 44.5mm. Forend finish: Nickel. Supplied with matching screws, face plate and strike.

Coat Towel Hanger Cap Organizer Rack Home Bathroom Over Door Holder With 5 Hooks

The Faithfull Bottle Jack is high quality and fitted with a unique overload protection system and large base to provide added stability. All stress points are reinforced for durability, and a heat treated extension screw with a serrated saddle provides a generous lifting area, a secure grip and can be adjusted for either a low pickup point or a maximum lift height. The Bottle Jack is supplied with a two piece handle and manufactured to EN 1494 specifications. This jack is for temporarily lifting vehicles only. Always use proper rated capacity axle stands for the vehicle after jacking.The FAIAUJACBOT4 Bottle Jack has the following specifications: Capacity: 4 Tonnes. Minimum height: 194mm. Lifting height: 118mm. Adjusting height: 60mm.

Color Elephant Removable PVC Wall Sticker

Warm Soft Tortilla Blanket Pattern Plush Blanket

Forest Printed Design Wall Tapestry