Libre
Soutien
Chargeur de voiture Convertisseur DC 12V à 5V 3A USB Adaptateur voiture accessoires de voiture
Kurzinfo: Acme F100-01 - FM-Transmitter Gruppe Zubehör Hersteller Acme Hersteller Art. Nr. 055144 Modell F100-01 EAN/UPC Produktbeschreibung: Acme F100-01 - FM-Transmitter Produkttyp FM-Transmitter Geeignet für Installation Auto Paketinhalt Fernbedienung, FM-Transmitter, Sicherung Abmessungen (Breite x Tiefe x Höhe) 5 cm x 4 cm x 10 cm Ausführliche Details Allgemein Produkttyp FM-Transmitter Geeignet für Installation Auto Display LCD-Anzeige Paketinhalt Fernbedienung, FM-Transmitter, Sicherung Breite 5 cm Tiefe 4 cm Höhe 10 cm Verbindungen Verbindungen Audio Line-In Verschiedenes Besonderheiten Integrierter SD-Kartenleser, integrierter USB-Flash-Laufwerk-Digital-Player Platzierung/Befestigung Auto-Zigarettenanzünder
Kurzinfo: Hama Holder - Saugnapfmontage - Schwarz - für TomTom GO 520T, 720T, 730T, 920T, 930, ONE V2 Europa, V3, V4, V4 Benelux, V4 Europa Gruppe Zubehör Hersteller Hama Hersteller Art. Nr. 00093723 Modell Holder EAN/UPC 4007249937230 Produktbeschreibung: Hama Holder - Saugnapfmontage Produkttyp Saugnapfmontage Vorgesehen für Navigator Gewicht 168 g Entwickelt für TomTom GO 520T, 720T, 730T, 920T, 930, ONE V2 Europa, V3, V4, V4 Benelux, V4 Europa Ausführliche Details Allgemein Produkttyp Saugnapfmontage Vorgesehen für Navigator Gewicht 168 g Farbe Schwarz Informationen zur Kompatibilität Entwickelt für TomTom GO 520T, 720T, 730T, 920T, 930 TomTom ONE V2 Europa, V3, V4, V4 Benelux, V4 Europa
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
1-komponentiger, pastöser Klebe-/Dichtstoff auf Polyurethan-Basis, der durch Luftfeuchtigkeit zu einem gummielastischen Material vernetzt (aushärtet). Die Hautbildungs- und Durchhärtezeit sind von der Luftfeuchtigkeit und der Temperatur - die Durchhärtezeit ist zusätzlich von der Fugentiefe - abhängig. Durch Erhöhung von Temperatur und Luftfeuchtigkeit können diese Zeiten verkürzt werden. Niedrige Temperaturen, sowie eine geringe Luftfeuchtigkeit wirken sich dagegen verzögernd aus. schnell trocknendextrem hohe UV-Beständigkeithohe Haftfestigkeitüberlackierbar nach erfolgter Hautbildung (Vorversuche empfohlen)nach Aushärtung dauerelastisch300 mlin verschienden Farben erhältlich
Tipo:Xenon HID; Potencia (W):35; Color temperatura:6000K; Luz:Alto; Voltaje de Entrada de Balastro (V):12; Voltaje de Salida de Balastro (V):9-16; Potencia de Salida de Balastro (W):35; Soporte de Lámpara:H1; Color de la Luz:Blanco; Dimensiones de Unidad / L x A x L (cm):23166; Peso Neto (kg):0.8; Función:Linterna de Cabeza; Material:Aluminio fundido; Características:Impermeable,De Alto Rendimiento; Voltaje de Entrada:12V,CC
