AGV K3 Brasil Flag Helm Weiss XL

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Feature:1.Only 7g, light weight, and compact size.2.bluetooth V4.2 wireless connection, stable and fast audio transmission speed, no delay and ensure original and high-quality music.3.HD microphone, chat with friends and families smooth and joyfully.4.On-cord control, you can get hands-free call, adjust volume and pause and play music, expedient for operation.5.Built-in 120mAh Li-ion battery, lasts 2h calling time and 6h playing time ( charging for 2h ).Specification:BrandKELIMAModelHW - P9bluetooth Versionbluetooth V4.2Operation distance10mTalk time2HMusic Time6HMaterialABSApply To Car BrandUniversalCompatible withUniversalWorking Voltage5V / 2AProduct weight0.0070 kgPackage weight0.0520 kgProduct size (L x W x H)5.90 x 1.30 x 1.20 cm / 2.32 x 0.51 x 0.47 inchesPackage size (L x W x H)16x 9x 4cm / 6.3 x 3.54 x 1.57 inchesPackage Included:1 X Receiver1 X Micro USB Cable1 X 3.5mm Adapter1 X Clamp1 X English / Chinese Manual

Double spoiler with incorporated air extractors: optimization of the aerodynamic trailand internal cooling. SHARK skin peak side fastenings: passive reduction of aerodynamic noise. A very compact helmet that only weighs 1,290g, while offering a most comfortable and comprehensive accessory. A micro-tech interior with antibacterial properties under the AEGIS label. Features
Constructed from carbon aramid fibre Constructed from multiaxial glass fiber Integrated UV380 label & anti-scratch sun visor Double D-ring strap Visor can be fitted with a Pinlock Max Vision® film insert 2 shell sizes : optimal morphological adjustment Optimal comfort for the persons wearing glasses Quick release visor system Removable and washable cheek pads and inner lining (Use the delicates or cold cycle and place inside a washing net) Planned location for SHARKTOOTH® Anti-scratch visor AEGIS-interior

Visier Scorpion for Exo 500 / 1000 | Article: Scorpion Exo 500 / 1000 Visor, blue | Article: Scorpion Exo 500 / 1000 Visor, blue, blue, Size One Size

Scott 450 Noise Motocross JerseyDas Scott 450 Noise Trikot ist ein sehr vielseitiges Kleidungsstück, das mit hervorragenden feuchtigkeitsregulierenden Eigenschaften und hohem Komfort ausgestattet ist. Der flache Kragen verhindert einen unbequemen Sitz unter der Nackenstütze.Eigenschaften:Athletic fit Vollständig belüftetes Obermaterial Silikonbeschichteter Anti-Rutsch-Einsatz am Rücken Verstärkte Bündchen zur Vermeidung von Überstreckung Spezifikationen:Konstruktion:Obermaterial aus leichtem Polyester seitliche Mesh-Einsätze geklebte Bündchen Kragen in sportlicher Passform Anti-Rutsch-Einsatz am Rücken aus Silikon Passform:Athletic Größe:S-2XL

Safety
Prepared for back protector Lev. 1 Warrior Protectors EN 1621-1 Level 1 on shoulders and ellbows
Comfort
50% waterproof garment prepared for thermo lining L30 prepared for H2Out lining X47 elastic knitted cuff
Performance
Step-in Clothing: layered clothing system optional
Materials
sheep leather, 0.7/0.9 mm thick, extra comfort leather
Maintenance
Do not Wash Do not bleach Do not tumble dry Line drying in the shade Do not iron Do not dry clean Do not wring