Replay Shift Motorcycle Jeans, blue, Size 34, blue, Size 34

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

The SCOTT Obsess ACS sunglasses are your best bet with superlative protection, secure grip, and a sharp look.
Features
SCOTT Fusion Frame No-slip soft nose pads Textured temple pads SCOTT Precision Optics lens quality Impact protection Base 8 ACS Air Control System 100% UV protection Measurements (mm): glass width: 59 glas height: 39 straps: 120 Thermoformed sport case with microfiber bag

Features
Double spoiler with incorporated air extractors: optimization of the aerodynamic trail and internal cooling "SHARK skin" peak side fastenings: passive reduction of aerodynamic noise Autoseal system: flattens the visor onto the helmet, offers better soundproofing and seals the helmet (against water and cold) Constructed from multiaxial glass fiber Integrated UV380 lable & anti-scratch sun visor Anti-scratch visor Prepared for Pinlock Max Vision Double D-ring strap Quick release visor system Optimal comfort for the persons wearing glasses Planned location for SHARKTOOTH® 1390g

Premier is one of the most historic and oldest brands in the motorcycle helmet world. In 2014, Premier s program is extended with a retro full face helmet, which is not only improved in fitment but also graphically and all other components. The Trophy line is based on the shape of the helmets from the 70s, but equipped with the latest safety standards. Features
The outer shell is formed using fiber DCA: a carbon fiber and aramid fiber blend and reinforced with Dyneema by epoxy resin The inner shell has been formed by a variety of EPS that is best able to absorb the energy, caused by a fall The interior is perfectly matched to the harmonious retorstyle and is made of anti-allergic material and synthetic leather, like the cheek pads The Trophy helmet is equipped with a double D-ring closure Like all Premier Helmets is the Trophy also tested according to current European legislation ECE 22-05 Weight: 1200 + - 50 gr

Features
Advanced Polycarbonate Composite Engineered Shell: Lightweight and tough. Fully-adjustable, aero-tuned visor: Reduces lift at high speeds. Ventilation System: Large intake manifolds and aero-tuned rear vents maximize airflow through the helmet. Large Eyeport: Fits all goggles and provides maximum visibility. Strap Grip: Keeps goggle strap in place. Padded Chin Strap with KwikWick™ material: Comfortable and secure. Closing chinstrap by double D ring.
AIRFIT Concept® Airfit™ permits a rider to personalize helmet fit through air adjustable cheek pads with additional noise reduction.Only by SCORPION EXO! KWIKWICK2® Liner Very effective, hypoallergenic, removable, machine washable, and very soft and pleasant to the touch, the KwikWick2® lining of the new ScorpionExo® 2011 range is a real custom-made slipper for your head.

Specifications:for VW CD Machine Model: RCD510+310USB Switch Socket Size: about 2.3x2.3x3.9cm (0.90x0.90x1.53)Cable Length:about 96cm (37.79)Switch Socket Model: 5KD.035.726.AFit Model:for VW - PASSATforVW - GOLF MK5forVW - GOLF GTI MK5 MK6Note:Please check the CD machine model before buying. If you are unsure whether it can apply to your car, please contact us first time. Thanks.Package Included:1 x USB Switch Socket1 x CableNotice:-Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.-Please allow 1-3CM differs due to manual measurement.-Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.