Traditional Kitchen Sink Faucet Cold Water Only, Retro Brass Single Handle Kitchen Tap Golden Electroplated Standard Spout Lightinthebox

It is ergonomically designed for a controlled operation. The front handle is detatchable and the motor housing top is shaped to fit the hand perfectly, giving the user a variety of gripping positions to help relieve fatigue. There are optimum speed selections and assorted accessories for a wide range of sanding jobs. The sanding pad and base have a velcro style attachment for a secure fit and to ease changing of pads. The sanding sheet has 9 holes, designed for efficient flow of dust through machine for collection in dust bag. This helps keep the working enviroment cleaner and also cuts down on cleaning time afterwards.

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

This R.S.T. Plasterers finishing trowel has a strong and durable carbon steel blade, which is fixed with invisible rivets. Finishing trowels are used in smoothing and finishing the surface of plaster. They help to compact the surface and add to the quality and durability of the work. Size: 280 x 115mm (11 x 4.1/2in).Fitted with a straight wooden handle.

Pin vices are chiefly used for holding small taps, reamers, scribers or wire. The handles are tubular which permit holding wires of any length or diameter up through the length of the tool.Size: 1Capacity: 0 - 1mm (0 - 3/64 in)

Quantity:2; Theme:Novelty,Places; Type:Wall Shelves Ledges,Wall Signs,Metal Wall Art; Style:Modern,European; Material:Special Material; Shipping Weight:0.265; Net Weight:0.2; Listing Date:09/22/2022; Production mode:Self-produce; Size:2312.310.3

High leverage compound cutting action snips made from forged alloy steel. Chrome Molybdenum construction with serrated cutting edge to prevent slippage when cutting. The one handed automatic latch releases with the squeeze of the handles which are bi-material for extra comfort and grip. These snips cut up to 18 gauge steel and are suitable for cutting aluminium, sheet uPVC, wire mesh, leather, copper and plastic. Size: 250mm (10in).1 x Stanley Yellow Long Aviation Snip Straight Cut 250mm (10in)