Armorgard TransBankâ„¢ Hazard Transport Box 685 x 480 x 520mm

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

The Wera Slotted 160i VDE insulated screwdrivers are tested individually for dielectric strength under a load of 10,000 volts so as to ensure safe working with loads up to 1,000 volts. They have a premium lasertip which is a laser roughened surface that literally bites into the screwhead, reducing cam out. With patented ergonomic, multi component Kraftform handle which uniquely fits to the shape of the hand during screwdriver use. Please note: WER006100 does not have a Lasertip.Blade Length, 150mmTip, 6.5mm

Using a staple gun shouldn’t be a workout. Rapid ALU Combi Tackers with Powercurve Technology™ were developed with a leading physiotherapist for up to 65% less effort. It’s not only easier to squeeze, it also perfectly matches the power of your hand. The patented 3-step force adjuster system lets the user decide for themselves how much power to deploy. Save effort on jobs with short leg lengths and turn up the power with a simple flip of the force adjuster when required. Save energy - Your own.The Rapid ALU940 Combi Tacker is a high quality, ergonomically designed tacker ideal for do-it-yourself work, for example labels, textiles, canvas and other fibred materials as well as fine wood trim around the house. It has a dual magazine which uses Rapid No. 140 staples 6-14mm and No. 8 brads 15mm. Made in Sweden, it has a strong and light aluminium exterior with an ergonomic design and comfortable soft grip areas and comes covered by a 3 year guarantee.

4pcs T1 T2 Protección de las manos de seguridad Serrín Sierra de madera Empuje el conjunto de varillas para la mesa de carpintería Herramienta de carpintería

The Stanley STA 0-65-425 7 piece FatMax Screwdriver Set Parallel / Flared / Pozi 7 piece set includes: 3 x Pozi: PZ0 x 75mm, PZ1 x 100mm, PZ2 x 125mm.2 x Parallel: 3mm x 100mm, 3.5mm x 75mm.2 x Flared: 5.5mm x 100mm, 8mm x 150mm. These Stanley FatMax ® Screwdriver have a chrome vanadium steel bars which allow high torque and reduce the risk of tip breakage. The handles are moulded directly to the shaft for a virtually unbreakable bond - giving long life and durability. The soft grip handles give a perfect combination of great grip and reduced fatigue in use and are colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.

These Faithfull professional, high quality Combination Spanners are forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Manufactured to DIN 3113 standards. The broached jaws and rings ensure a consistent tolerance and a guaranteed accurate fit. Both the jaw and ring end are set at a 15 degree offset for ease of use in awkward positions.Size 36mm